1066708 Phoenix Contact DC/DC Converters

Product Details

• Weight0.24 kg
• Input voltage range
  48 V DC ... 110 V DC -37,5 % ...+40 %
• Inrush current limitation typical
  8 A
• Inrush current integral (I2t)
  typ. 0.1 A2s
• Stripping length
  10 mm
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Nominal output current (IN)
  2.5 A
• Feedback voltage resistance
  ≤ 35 V DC
• Output current
  2.5 A
• Auxiliary converter stage
  4 kHz ... 70 kHz (Auxiliary converter stage)
• Protection class
  II
• Hood version
  Polycarbonate
• Efficiency
  typ. 92.5 % (48 V DC)
• Maximum altitude
  ≤ 5000 m (> 2000 m, observe derating)
• EMC requirements for noise immunity
  EN 61000-6-1
• Standard - Electrical safety
  IEC 61010-2-201 (SELV)
• Typical current consumption
  typ. 1.7 A (48 V DC)
• Mains buffering
  typ. 14 ms (48 V DC)
• Type test (IEC/EN 60950-1) A
  4 kV AC
• Production test A
  3 kV AC
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (> 24 V DC, constant capacity)
Dynamic Boost (IDyn.Boost)
5 A (≤ 60 °C (4,9 s))
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Temperature
25 °C
Voltage
300 V (1 s)
Degree of protection
IP20
Height
106 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Degree of pollution
2
Standard - Safe isolation
IEC 61558-2-16
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Input
2 kV (symmetrical)
I/O/S
asymmetrical
Frequency
60 Hz
Voltage dip
0 %
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 3)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 10.0.1
27210901
Main converter stage
70 kHz ... 150 kHz (Main converter stage)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (start-up type tested)
-40 °C
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Overvoltage category EN 61010-1
II (≤ 5000 m)
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Discharge in air
8 kV (Test Level 3)
Test field strength
1000 A/m
Output
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Voltage dips
EN 61000-4-11
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Test level 2
16.67 Hz 50 Hz 60 Hz (Test Level 4)
ECLASS 11.0
27210901
Input fuse
4 A (slow-blow, internal)
Insulation voltage input/output
3.8 kV DC (type test)
Connection method
Push-in connection
Conductor cross section AWG
24 ... 14
Nominal output voltage (UN)
24 V DC
Static Boost (IStat.Boost)
3.125 A (≤ 40 °C)
MTBF (IEC 61709, SN 29500)
> 1347000 h (25 °C)
Time
432000 h
Width
32 mm
Depth
90 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Vibration (operation)
< 15 Hz, ±2.5 mm amplitude; 15 Hz ... 100 Hz: 2.3 g 90 Min. (in accordance with IEC 60068-2-6)
Climatic class
3K3 (in acc. with EN 60721)
Standard - Safety of transformers
EN 61558-2-16
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Noise emission
EN 55016
Frequency range
50 Hz ... 60 Hz
Comments
Criterion B
Surge voltage load (surge)
EN 61000-4-5
Additional text
Test Level 2
Pulse-shape magnetic field
EN 61000-4-9
Attenuated oscillating wave
EN 61000-4-18
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 9.0
27210901
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
Conducted noise emission
EN 55016
Contact discharge
8 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Signal
2 kV (Test Level 4 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Number of periods
0.5 / 1 / 5 / 50 periods
Asymmetrical conducted disturbance variables
EN 61000-4-16
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1