1065635 Phoenix Contact Buffer Modules

1065635 Product Details

• Noise emission
  EN 55016
• Input
  2 kV (Test Level 3 - asymmetrical)
• Surge voltage load (surge)
  EN 61000-4-5
• Depth
  125 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Max. permissible relative humidity (operation)
  ≤ 95 %
• Installation height
  ≤ 4000 m
• Fixed backup threshold
  < 22 V DC
• Power consumption PN (UN, IOUT = IN, Icharge = 0)
  488 W
• Recharging time
  4.4 min. (2.5 A)
• Switch-on time
  1 ms (buffer mode)
• Voltage drop, input/output
  0.5 V DC
• Installation distance right/left
  0 mm / 0 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C (> 40 °C Derating: 1 %/K)
• Climatic class
  3K3 (in acc. with EN 60721)
• Input voltage range
  22.5 V DC ... 30 V DC
• Current consumption INo-Load(UN, IOUT = 0, Icharge = 0)
  0.1 A (No-load)
• Power consumption Pmax (UN, IOUT = IStat.Boost, Icharge = max)
  604 W
• Buffer time
  4 min. (2.5 A)
• Inrush current
  ≤ 7 A (≤ 4 ms)
Connection in series
No
Static Boost (IStat.Boost)
25 A
Idling load power dissipation
4 W
Efficiency
> 98 % (with charged energy storage device)
Protection class
III (Special application (SELV input voltage, hazardous voltages are generated in the device).)
Connection method
MINI-USB Type B
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1 mm²
Number of interfaces
1
Transmission speed
9600 baud ... 115200 baud (Default: 115200 baud)
Electrical isolation
Yes, UL approved
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
0.15 MHz ... 80 MHz
Signal
1 kV (Test Level 2 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 9.0
27049201
Height
130 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (start-up type tested)
-40 °C
Degree of pollution
2
Voltage type of supply voltage
DC
Current consumption Icharge (UN, IOUT = 0, Icharge = max)
10 A (charging process)
Power consumption PNo-Load (UN, IOUT = 0, Icharge = 0)
4 W
Charging time
6 min. (2.5 A)
Dielectric strength
max. 35 V DC (Reverse polarity protection)
Output voltage
24 V DC
Output power POUT (UN, IOUT = Istat.Boost)
600 W
Short-circuit-proof
yes
MTBF (IEC 61709, SN 29500)
1839057 h (25 °C)
Stripping length
8 mm
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 0.75 mm²
Locking
Screw
Transmission physics
USB 2.0
Transmission length
max. 5 m
Standard designation
Safety extra-low voltage
Contact discharge
6 kV (Test Level 3)
Electromagnetic HF field
EN 61000-4-3
Voltage
10 V
REACh SVHC
Lead 7439-92-1
Width
244 mm
Degree of protection
IP20
Ambient temperature (storage/transport)
-40 °C ... 60 °C
Input voltage
24 V DC (SELV)
Current consumption IN (UN, IOUT = IN, Icharge = 0)
max. 30 A
Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max)
30 A
Power consumption Pcharge (UN, IOUT = 0, Icharge = max)
244 W
Internal input fuse
no
Connection in parallel
yes
Output power POUT (UN, IOUT = IN)
480 W
Idling-proof
yes
Net weight
2.86 kg
Mounting position
horizontal DIN rail NS 35, EN 60715
Torque
0.5 Nm ... 0.6 Nm
Conductor cross section AWG
24 ... 18
Connection marking
5.1
Access time
≤ 2 s
Standards/regulations
IEC 61010-1 (SELV)
Discharge in air
8 kV (Test Level 3)
Fast transients (burst)
EN 61000-4-4
Output
2 kV (Test Level 3 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
Output current IN
20 A
Nominal load power dissipation
90 W
Power loss nominal load max.
90 W (complete discharge 20 A at 30 s)
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross section solid
0.2 mm² ... 1 mm²
Interface
USB (Modbus/RTU)
Topology
Point-to-point
Chipset
Silicon Labs CP2104-F03-GM
Electrostatic discharge
EN 61000-4-2
Test field strength
10 V/m
Comments
Criterion A
Conducted interference
EN 61000-4-6

Product condition