1047501 Phoenix Contact Terminal Blocks

Product Details

• Color
  black/yellow
• Maximum load current
  41 A (with 6 mm² conductor cross section)
• Open side panel
  No
• Nominal cross section
  1.5 mm²
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Nominal voltage UN
  500 V
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Result of aging test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Number of shocks per direction
  3
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Connection method
  Push-in connection
• Width
  19 mm
• Conductor cross section flexible max.
  4 mm²
• Max. AWG conductor cross section, flexible
  10
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.2 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
Overvoltage category
III
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Short-time current
0.3 kA
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 15
27.4 mm
Conductor cross section AWG max.
10
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 7.0
EC000897
Insulating material group
I
Nominal current IN
41 A
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 6.0
EC000897
Rated surge voltage
6 kV
Maximum total current
41 A
Finger protection
guaranteed
Setpoint
5 N
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
21.6 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Connection
Feed-in stage
ECLASS 9.0
27141120
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Tight fit on carrier
NS 35/NS 15
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
2.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Value
0.2 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Number of levels
1
Power frequency withstand voltage setpoint
1.89 kV
Back of the hand protection
guaranteed
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Nominal cross section feed-in
4 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of connections
7
Insulating material
PA
Test directions
X-, Y- and Z-axis (pos. and neg.)