1047479 Phoenix Contact Terminal Blocks

Product Details

• Color
  blue
• Nominal current IN
  41 A
• Nominal cross section
  1.5 mm²
• Insulating material
  PA
• Overvoltage category
  III
• Insulating material group
  I
• Open side panel
  No
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Number of levels
  1
• Rated surge voltage
  6 kV
• Nominal cross section feed-in
  6 mm²
• Degree of pollution
  3
• Maximum total current
  41 A
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
• Shock form
  Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
19 mm
Height
18.7 mm
Conductor cross section solid min.
0.34 mm²
Number of connections
7
Flammability rating according to UL 94
V0
Nominal voltage UN
500 V
Maximum load current
41 A (with 6 mm² conductor connection)
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
21.6 mm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Connection
Feed-in stage
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Proof of thermal characteristics (needle flame) effective duration
30 s
Connection method
Push-in connection
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG max.
10
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Internal cylindrical gage
A3
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
ETIM 6.0
EC000897
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
10 mm ... 12 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 7.0
EC000897
Test duration per axis
5 h
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Value
0.2 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120