1047478 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Rated surge voltage
  6 kV
• Maximum total current
  41 A
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Connection method
  Push-in connection
• Conductor cross section AWG min.
  24
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.2 mm²
• Internal cylindrical gage
  A3
• ECLASS 11.0
  27141120
• ETIM 6.0
  EC000897
• Nominal cross section
  1.5 mm²
• Degree of pollution
  3
• Nominal current IN
  41 A
• Oscillation, broadband noise test result
  Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
21.6 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141120
Number of levels
1
Insulating material
PA
Insulating material group
I
Open side panel
No
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
10
Connection
Feed-in stage
Nominal cross section feed-in
4 mm²
Overvoltage category
III
Nominal voltage UN
500 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
19 mm
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
24
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
Number of connections
7
Flammability rating according to UL 94
V0
Maximum load current
41 A (with 6 mm² conductor connection)
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
18.7 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Value
0.2 mm²
ETIM 7.0
EC000897
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)