1047453 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  19
• Color
  black/yellow
• Degree of pollution
  3
• Maximum total current
  41 A
• Nominal voltage UN
  500 V
• Bending test turns
  135
• Tensile test result
  Test passed
• Setpoint
  5 N
• Result of thermal test
  Test passed
• Number of levels
  1
• Insulating material group
  I
• Nominal current IN
  41 A
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Result of voltage-drop test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  43.9 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Nominal cross section feed-in
4 mm²
Flammability rating according to UL 94
V0
Back of the hand protection
guaranteed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 15
27.4 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Result of aging test
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
24
Conductor cross section flexible max.
4 mm²
ECLASS 9.0
27141120
Rated surge voltage
6 kV
Open side panel
No
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Tight fit on carrier
NS 35/NS 15
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
2.5 mm²
Short-time current
0.3 kA
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
10
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
21.6 mm
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
24
Ageing test for screwless modular terminal block temperature cycles
192
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Value
0.2 mm²
ECLASS 10.0.1
27141120
ETIM 7.0
EC000897
Nominal cross section
1.5 mm²
Insulating material
PA
Overvoltage category
III
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Internal cylindrical gage
A3
Connection
Feed-in stage
ETIM 6.0
EC000897
Maximum load current
41 A (with 6 mm² conductor cross section)
Smoke gas toxicity NFPA 130 (SMP 800C)
passed