1047452 Phoenix Contact Terminal Blocks

Product Details

• Short-time current
  0.3 kA
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Color
  pink
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of tight fit on support
  Test passed
• Number of connections
  19
• Degree of pollution
  3
• Maximum total current
  41 A
• Nominal voltage UN
  500 V
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Bending test turns
  135
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Conductor cross section short circuit testing
  2.5 mm²
• Result of aging test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 15
27.4 mm
Conductor cross section solid min.
0.34 mm²
Nominal cross section feed-in
4 mm²
Rated surge voltage
6 kV
Insulating material group
I
Back of the hand protection
guaranteed
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
5 N
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
21.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
6 mm²
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 7.0
EC000897
Nominal cross section
1.5 mm²
Insulating material
PA
Maximum load current
41 A (with 6 mm² conductor cross section)
Nominal current IN
41 A
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35/NS 15
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Conductor cross section flexible min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
43.9 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141120
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Connection
Feed-in stage
Shock test result
Test passed
Conductor cross section AWG max.
10
Conductor cross section flexible max.
4 mm²
Value
0.2 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 6.0
EC000897
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Max. AWG conductor cross section, flexible
10
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)