1047449 Phoenix Contact Terminal Blocks
Part#:1047449
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Distribution block, nom. voltage: 500 V, nominal current: 17.5 A, connection method: Push-in connection, Push-in connection, number of connections: 19, cross section: 0.14 mm² - 2.5 mm², AWG: 26 - 14, width: 43.9 mm, color: white, mounting type: NS 15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1047449 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Overvoltage category III
- Back of the hand protection guaranteed
- Power frequency withstand voltage setpoint 1.89 kV
- Color white
- Open side panel No
- Bending test turns 135
- Bending test rotation speed 10 rpm
- Result of voltage-drop test Test passed
- Short-time current 0.3 kA
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of tight fit on support Test passed
- Conductor cross section short circuit testing 2.5 mm²
- Ageing test for screwless modular terminal block temperature cycles 192
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock form Half-sine
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Surface flammability NFPA 130 (ASTM E 162) passed
- Height NS 15 27.4 mm
- Conductor cross section AWG min. 24
- Flammability rating according to UL 94 V0
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Short circuit stability result Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Oscillation, broadband noise test result Test passed
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Connection method Push-in connection
- Conductor cross section flexible max. 4 mm²
- Connection cross sections directly pluggable 0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- Rated surge voltage 6 kV
- Nominal voltage UN 500 V
- Finger protection guaranteed
- Tensile test result Test passed
- Tight fit on carrier NS 35/NS 15
- Result of aging test Test passed
- Acceleration 30g
- Shock duration 18 ms
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Width 43.9 mm
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section solid max. 6 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.2 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Number of shocks per direction 3
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Conductor cross section solid min. 0.34 mm²
- Stripping length 10 mm ... 12 mm
- Conductor cross section flexible min. 0.2 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
- Value 0.2 mm²
- ETIM 6.0 EC000897
- Shock test result Test passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Length 21.6 mm
- Conductor cross section AWG max. 10
- Min. AWG conductor cross section, flexible 24
- Max. AWG conductor cross section, flexible 10
- Internal cylindrical gage A3
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- Degree of pollution 3
- Result of surge voltage test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 11.0 27141120
- Number of connections 19
- Setpoint 5 N
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Connection Feed-in stage
- ECLASS 9.0 27141120
- Nominal cross section 1.5 mm²
- Insulating material group I
- Maximum load current 41 A (with 6 mm² conductor cross section)
- Result of power-frequency withstand voltage test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.2 mm²
- Number of levels 1
- Insulating material PA
- Maximum total current 41 A
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- Nominal cross section feed-in 4 mm²
- Nominal current IN 41 A
- Result of flexion and pull-out test Test passed
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- ECLASS 10.0.1 27141120
- ETIM 7.0 EC000897
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
