1047424 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  black
• Maximum load current
  22 A (with a 2.5 mm² conductor cross section)
• Nominal current IN
  17.5 A
• Result of thermal test
  Test passed
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Width
  43.9 mm
• Connection
  Pick-off level
• Conductor cross section solid max.
  2.5 mm²
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Value
  0.34 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 10.0.1
  27141120
• Number of connections
  19
• Insulating material
  PA
Insulating material group
I
Maximum total current
32 A
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Stripping length
8 mm ... 10 mm
Conductor cross section flexible max.
1.5 mm²
Nominal cross section feed-in
4 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Proof of thermal characteristics (needle flame) effective duration
30 s
Open side panel
No
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
21.6 mm
Height
17.7 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Nominal cross section
1.5 mm²
Degree of pollution
3
Rated surge voltage
6 kV
Nominal voltage UN
450 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Number of shocks per direction
3
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
14
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 6.0
EC000897
ECLASS 9.0
27141120
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 7.0
EC000897
Permissible humidity (storage/transport)
30 % ... 70 %