1046992 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section feed-in
  4 mm²
• Rated surge voltage
  6 kV
• Maximum load current
  22 A (with a 2.5 mm² conductor cross section)
• Insulating material group
  I
• Result of power-frequency withstand voltage test
  Test passed
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 35/NS 15
• Result of voltage-drop test
  Test passed
• Conductor cross section short circuit testing
  2.5 mm²
• Test spectrum
  Service life test category 2, bogie-mounted
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  21.6 mm
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  14
• Number of levels
  1
• Color
  white
Degree of pollution
3
Open side panel
No
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection
Pick-off level
Conductor cross section solid max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Number of connections
13
Insulating material
PA
Overvoltage category
III
Maximum total current
32 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Short-time current
0.3 kA
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 15
27.4 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
1.5 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
ECLASS 10.0.1
27141120
ETIM 6.0
EC000897
Nominal cross section
1.5 mm²
Flammability rating according to UL 94
V0
Nominal voltage UN
500 V
Nominal current IN
17.5 A
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Value
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
31.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A3
ETIM 7.0
EC000897
ECLASS 9.0
27141120
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C