1046977 Phoenix Contact Terminal Blocks

1046977 Product Details

• Nominal cross section
  1.5 mm²
• Maximum load current
  22 A (with a 2.5 mm² conductor cross section)
• Overvoltage category
  III
• Nominal current IN
  17.5 A
• Acceleration
  30g
• Shock duration
  18 ms
• Shock form
  Half-sine
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Color
  green
• Flammability rating according to UL 94
  V0
• Oscillation, broadband noise test result
  Test passed
• Open side panel
  No
• Test duration per axis
  5 h
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection in acc. with standard
  IEC 60998-2-2
• Connection
  Pick-off level
• Number of levels
  1
Insulating material
PA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Number of connections
13
Degree of pollution
3
Maximum total current
32 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
31.4 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
14
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A3
Nominal cross section feed-in
4 mm²
Rated surge voltage
6 kV
Insulating material group
I
Nominal voltage UN
450 V
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
18.7 mm
Connection method
Push-in connection
Conductor cross section solid max.
2.5 mm²
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
ECLASS 10.0.1
27141120
ETIM 7.0
EC000897
Length
21.6 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ETIM 6.0
EC000897
Conductor cross section flexible max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Min. AWG conductor cross section, flexible
26
Value
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120

Product condition