1046962 Phoenix Contact Terminal Blocks

1046962 Product Details

• Nominal cross section feed-in
  4 mm²
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Nominal voltage UN
  450 V
• Oscillation, broadband noise test result
  Test passed
• Insulating material group
  I
• Open side panel
  No
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Connection
  Pick-off level
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section AWG max.
  14
• Max. AWG conductor cross section, flexible
  14
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
• ECLASS 11.0
  27141120
• Nominal cross section
  1.5 mm²
• Overvoltage category
  III
• Nominal current IN
  17.5 A
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
31.4 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ETIM 7.0
EC000897
Number of connections
13
Insulating material
PA
Rated surge voltage
6 kV
Maximum load current
22 A (with a 2.5 mm² conductor cross section)
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
17.7 mm
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
ECLASS 9.0
27141120
Number of levels
1
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Color
blue
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Shock form
Half-sine
Maximum total current
32 A
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Value
0.34 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
21.6 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 6.0
EC000897

Product condition