1046957 Phoenix Contact Terminal Blocks

Product Details

• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Rated surge voltage
  6 kV
• Maximum load current
  22 A
• Maximum total current
  26 A
• Number of levels
  1
• Color
  violet
• Nominal voltage UN
  500 V
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  2.5 mm²
• Short-time current
  0.3 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test duration per axis
  0.0013888888889 h
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• ECLASS 5.1
  27141120
• UNSPSC 7.0901
  39121410
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Number of connections
18
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
ETIM 6.0
EC000897
ETIM 3.0
EC000897
UNSPSC 21.0
39121410
Nominal cross section
1.5 mm²
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal current IN
17.5 A
Open side panel
No
Result of surge voltage test
Test passed
Tight fit on carrier
NS 35/NS 15
Result of tight fit on support
Test passed
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ECLASS 4.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 12.01
39121410
Potentials
1
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W
Insulating material group
I
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Acceleration
30g
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
21.6 mm
Height NS 15
26.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 19.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1 / B1
ECLASS 11.0
27141120
Connection method
Push-in connection
Conductor cross section AWG max.
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141120
Length
58.1 mm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
ECLASS 10.0.1
27141120
Height NS 35/7,5
28.4 mm
Conductor cross section solid max.
2.5 mm²
Min. AWG conductor cross section, flexible
20
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %