1046805 Phoenix Contact DC/DC Converters

1046805 Product Details

• Typical current consumption
  27 A (24 V DC)
• Input voltage range
  18 V DC ... 32 V DC
• Switch-on time
  < 1 s
• Typical response time
  300 ms (from SLEEP MODE)
• Type test (IEC/EN 60950-1) B
  4 kV DC
• Selective Fuse Breaking (ISFB)
  120 A (15 ms)
• Feedback voltage resistance
  ≤ 35 V DC
• POut
  > 100 % (LED lights up yellow, output power > 480 W)
• Voltage
  1 kV
• Side element version
  Aluminum
• Height with alternative assembly
  130 mm
• Depth with alternative assembly
  73 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Climatic class
  3K3 (EN 60721)
• EMC requirements, power plant
  IEC 61850-3
• Low Voltage Directive
  Conformance with Low Voltage Directive 2014/35/EC
• Discharge in air
  15 kV (Test Level 4)
• Comments
  Criterion A
• Output
  1 kV (Test Level 3 - symmetrical)
• Surge voltage load (surge)
  EN 61000-4-5
Voltage dips
EN 61000-4-29
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 4
15 kHz 150 kHz (Test Level 3)
Input, output (test level 3)
10 MHz (Test Level 2 - asymmetrical)
Inrush current limitation typical
2.7 A (after 1 ms)
Type test (IEC/EN 60950-1) C
0.5 kV DC
Production test C
0.5 kV DC
Stripping length
8 mm
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 0.75 mm²
Static Boost (IStat.Boost)
25 A
System deviation, static
< 3 % (change in load, static 10 % ... 90 %)
Residual ripple
< 50 mVPP
Connection in parallel
Yes, for redundancy and increased capacity
UOut
> 0.9 x USet (LED lights up green)
Time
278680 h
Protection class
Special with SELV input and output
Width
70 mm
Depth
125 mm
Power loss nominal load max.
< 26.6 W
Mains buffering
typ. 16 ms (24 V DC)
Type test (IEC/EN 60950-1) A
2 kV DC
Production test B
2 kV DC
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross section AWG
24 ... 16
Torque
0.6 Nm ... 0.8 Nm
System deviation, dynamic
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Short-circuit-proof
yes
Rise time
< 1 s (UOUT (10 % ... 90 %))
UIn
> 0.8 x UInNom (LED off)
Temperature
30 °C
Electric strength, max.
35 V DC (60 s)
Inrush current integral (I2t)
< 0.2 A2s
Production test A
2 kV DC
Connection method
Push-in connection
Conductor cross section solid
0.2 mm² ... 1 mm²
Nominal output current (IN)
20 A
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (> 24 V DC, constant capacity)
System deviation, input voltage change
< 0.4 % (change in input voltage ±10 %)
Connection in series
yes
MTBF (IEC 61709, SN 29500)
> 1034000 h (25 °C)
Auxiliary converter stage
190 kHz ... 220 kHz (Auxiliary converter stage)
Degree of protection
IP20
Height
130 mm
Efficiency
typ. 94.7 % (24 V DC)
Maximum power dissipation in no-load condition
< 4 W
Power dissipation SLEEP MODE
< 2 W
Overvoltage category EN 61010-1
II
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Additional text
Test Level 2
Electrostatic discharge
EN 61000-4-2
Frequency range
50 Hz ... 60 Hz
Test field strength
100 A/m
Conducted interference
EN 61000-4-6
Damped oscillating magnetic field
EN 61000-4-10
Test level 1
15 Hz 150 Hz (Test Level 3)
Alternating component of DC voltage
EN 61000-4-17
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 9.0
27210901
Insulation voltage input/output
4 kV DC (type test)
Type test (IEC/EN 60950-1) D
0.5 kV DC
Production test D
0.5 kV DC
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Nominal output voltage (UN)
24 V DC
Dynamic Boost (IDyn.Boost)
30 A (5 s)
Magnetic circuit breaker tripping
A1...A16 / B2...B13 / C1...C6 / Z1...Z16
No-load proof
yes
Types of signaling
LED
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Output current
20 A
Main converter stage
67 kHz ... 135 kHz (Main converter stage)
Hood version
Stainless steel X6Cr17
Weight
1.2 kg
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Vibration (operation)
5 Hz ... 100 Hz resonance search 2.3g, 90 min, resonance frequency 2.3g, 90 min
Overvoltage category EN 62477-1
III
Conducted noise emission
EN 55016
Contact discharge
8 kV (Test Level 4)
Input
1 kV (Test Level 3 - symmetrical)
I/O/S
asymmetrical
Pulse-shape magnetic field
EN 61000-4-9
Attenuated oscillating wave
EN 61000-4-18
Input, output (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27210901
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Width with alternative assembly
122 mm
Ambient temperature (start-up type tested)
-40 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Degree of pollution
2
EMC requirements for noise immunity
EN 61000-6-1
Standards/regulations
EN 61000-4-29
Noise emission
EN 55016
Fast transients (burst)
EN 61000-4-4
Signal
2 kV (Test Level 3 - asymmetrical)
Frequency
0 Hz
Test level 2
150 Hz 1.5 kHz (Test Level 3)
Test level 3
1.5 kHz 15 kHz (Test Level 3)
Test level 5
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Signals (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
Maximum altitude
≤ 5000 m (> 2000 m, observe derating)
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Standard designation
Mains variation/undervoltage
DNV GL conducted interference
Class B
DNV GL noise radiation
Class B
Electromagnetic HF field
EN 61000-4-3
Power frequency magnetic field
EN 61000-4-8
Voltage dip
0 %
Test level 6
0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3)
Input, output (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
Signals (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
ECLASS 10.0.1
27210901
Criterion A
Normal operating behavior within the specified limits.

Product condition