1017450 Phoenix Contact Terminal Blocks

Product Details

• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Short-time current
  1.2 kA
• ETIM 7.0
  EC000897
• UNSPSC 19.0
  39121410
• Static insulating material application in cold
  -60 °C
• ECLASS 7.0
  27141151
• ETIM 4.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 13.2
  39121402
• UNSPSC 21.0
  39121410
• UNSPSC 18.0
  39121410
• Potentials
  1
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
Setpoint
5 N
Conductor cross section short circuit testing
10 mm²
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
ECLASS 5.1
27141120
UNSPSC 20.0
39121410
Nominal cross section
6 mm²
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W
Insulating material
PA
Nominal voltage UN
1000 V
Back of the hand protection
Not guaranteed
Tight fit on carrier
NS 35
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
31 mm
Connection method
Bolt connection
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
10
Note
Connection bolts
Hole diameter, min.
10.4 mm
Tightening torque, min
10 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141131
ETIM 6.0
EC000897
Number of levels
1
Color
gray
Overvoltage category
III
Maximum total current
106 A (Bolt connection)
Result of surge voltage test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Shock form
Half-sine
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height
32.3 mm
Length
72.6 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
6 mm²
Conductor cross section flexible max.
120 mm²
Internal cylindrical gage
A5
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Bolt diameter
10 mm
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
Number of connections
9
Maximum load current
57 A
Open side panel
No
Finger protection
Not guaranteed
Power frequency withstand voltage setpoint
2.2 kV
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Hole diameter
10.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
ECLASS 5.0
27141131
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Tightening torque max
20 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Conductor cross section AWG max.
8
ECLASS 4.1
27141131
Rated surge voltage
8 kV
Insulating material group
I
Nominal current IN
41 A
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Conductor cross section solid max.
10 mm²
Max. AWG conductor cross section, flexible
250 kcmil
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Screw thread
M10
Cable lug width, max.
32 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 2.0
EC000897