Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

1017448 Phoenix Contact Terminal Blocks

Phoenix Contact 1017448 Pick-off terminal block, nom. voltage: 1000 V, nominal current: 41 A, connection method: Push-in connection, Bolt connection, number of connections: 5, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 31 mm, height: 32.3 mm, color: gray, mounting type
Phoenix Contact

Part#:1017448

Manufacturer:Phoenix Contact

Product Lifecycle:Active

In-stock parts: 2

Nov 24, 2024

Pick-off terminal block, nom. voltage: 1000 V, nominal current: 41 A, connection method: Push-in connection, Bolt connection, number of connections: 5, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 31 mm, height: 32.3 mm, color: gray, mounting type

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 1017448 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Nominal cross section
    6 mm²
  • Rated surge voltage
    8 kV
  • Nominal current IN
    41 A
  • Back of the hand protection
    Not guaranteed
  • Result of surge voltage test
    Test passed
  • Bending test turns
    135
  • Number of connections
    5
  • Insulating material group
    I
  • Maximum power dissipation for nominal condition
    1.31 W
  • Result of power-frequency withstand voltage test
    Test passed
  • Bending test rotation speed
    10 rpm
  • Setpoint
    5 N
  • Short circuit stability result
    Test passed
  • Result of thermal test
    Test passed
  • Test spectrum
    Service life test category 2, bogie-mounted
  • Test duration per axis
    5 h
  • Shock duration
    18 ms
  • Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
    130 °C
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 3
  • Calorimetric heat release NFPA 130 (ASTM E 1354)
    28 MJ/kg
  • Length
    57.4 mm
  • Color
    gray
  • Overvoltage category
    III
  • Open side panel
    No
  • Nominal voltage UN
    1000 V (when using HV M 10/2 or HV M 10/1 and appropriate partition plate)
  • Result of the test for mechanical stability of terminal points (5 x conductor connection)
    Test passed
  • Tensile test result
    Test passed
  • Result of tight fit on support
    Test passed
  • Requirement temperature-rise test
    Increase in temperature ≤ 45 K
  • Short-time current
    1.2 kA
  • Test specification, oscillation, broadband noise
    DIN EN 50155 (VDE 0115-200):2008-03
  • ASD level
    6.12 (m/s2)2/Hz
  • Bolt diameter
    10 mm
  • Hole diameter, min.
    10.4 mm
  • Ambient temperature (actuation)
    -5 °C ... 70 °C
  • ECLASS 11.0
    27141120
  • ECLASS 9.0
    27141120
  • ETIM 6.0
    EC000897
  • UNSPSC 12.01
    39121410
  • UNSPSC 19.0
    39121410
  • Potentials
    1
  • Flammability rating according to UL 94
    V0
  • Maximum load current
    57 A
  • Shock protection test specification
    DIN EN 50274 (VDE 0660-514):2002-11
  • Bending test conductor cross section/weight
    0.5 mm² / 0.3 kg
  • Tight fit on carrier
    NS 35
  • Result of temperature-rise test
    Test passed
  • Proof of thermal characteristics (needle flame) effective duration
    30 s
  • Oscillation, broadband noise test result
    Test passed
  • Test frequency
    f1 = 5 Hz to f2 = 250 Hz
  • Shock test result
    Test passed
  • Operating temperature
    -60 °C ... 105 °C (max. short-term operating temperature 130°C)
  • Ambient temperature (assembly)
    -5 °C ... 70 °C
  • ECLASS 5.0
    27141131
  • ECLASS 7.0
    27141151
  • ETIM 3.0
    EC000897
  • UNSPSC 13.2
    39121402
  • UNSPSC 18.0
    39121410
  • UNSPSC 20.0
    39121410
  • Number of levels
    1
  • Insulating material
    PA
  • Maximum total current
    109 A (Bolt connection)
  • Finger protection
    Not guaranteed
  • Power frequency withstand voltage setpoint
    2.2 kV
  • Result of flexion and pull-out test
    Test passed
  • Result of voltage-drop test
    Test passed
  • Tightening torque max
    20 Nm
  • Ambient temperature (storage/transport)
    -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
  • China RoHS
    Environmentally friendly use period: unlimited = EFUP-e
  • ECLASS 4.1
    27141131
  • ECLASS 6.0
    27141100
  • ETIM 2.0
    EC000897
  • UNSPSC 6.01
    30211811
  • UNSPSC 7.0901
    39121410
  • UNSPSC 21.0
    39121410
  • Connection
    1 level
  • Conductor cross section AWG min.
    20
  • Max. AWG conductor cross section, flexible
    250 kcmil
  • Conductor cross section flexible, with ferrule with plastic sleeve max.
    6 mm²
  • Tightening torque, min
    10 Nm
  • Cable lug width, max.
    32 mm
  • Permissible humidity (storage/transport)
    30 % ... 70 %
  • ECLASS 10.0.1
    27141120
  • ECLASS 4.0
    27141131
  • ECLASS 5.1
    27141120
  • ETIM 4.0
    EC000897
  • ETIM 7.0
    EC000897
  • UNSPSC 11
    39121410
  • Conductor cross section short circuit testing
    10 mm²
  • Relative insulation material temperature index (Elec., UL 746 B)
    130 °C
  • Smoke gas toxicity NFPA 130 (SMP 800C)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R26
    HL 1 - HL 3
  • Conductor cross section solid min.
    0.5 mm²
  • Conductor cross section solid max.
    10 mm²
  • Note
    Connection bolts
  • Test directions
    X-, Y- and Z-axis (pos. and neg.)
  • Number of shocks per direction
    3
  • Surface flammability NFPA 130 (ASTM E 162)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 3
  • Hole diameter
    10.4 mm
  • Connection in acc. with standard
    IEC 60947-7-1
  • Min. AWG conductor cross section, flexible
    10
  • Static insulating material application in cold
    -60 °C
  • Height
    32.3 mm
  • Conductor cross section flexible min.
    6 mm²
  • Conductor cross section flexible, with ferrule with plastic sleeve min.
    0.5 mm²
  • Result of aging test
    Test passed
  • Test specification, shock test
    DIN EN 50155 (VDE 0115-200):2008-03
  • Specific optical density of smoke NFPA 130 (ASTM E 662)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 3
  • Width
    31 mm
  • Stripping length
    10 mm ... 12 mm
  • Conductor cross section flexible max.
    120 mm²
  • Conductor cross section flexible, with ferrule without plastic sleeve min.
    0.5 mm²
  • Internal cylindrical gage
    A5
  • Ageing test for screwless modular terminal block temperature cycles
    192
  • Acceleration
    30g
  • Shock form
    Half-sine
  • Connection method
    Bolt connection
  • Conductor cross section AWG max.
    8
  • Conductor cross section flexible, with ferrule without plastic sleeve max.
    6 mm²
  • Screw thread
    M10

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


This item can ship within 24h!

1-year warranty

$24.66

Stock:

2

Select Qty:

$24.66

$24.66 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo