1017062 Phoenix Contact Electrical Safety Devices

1017062 Product Details

• Height
  112.2 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Rated control circuit supply voltage US
  24 V DC -15 % / +10 %
• Power consumption at US
  typ. 2 W (at US/UD; On state)
• Inrush current at UD
  1.5 A (Δt < 10 µs)
• Power consumption at UD
  typ. 0.9 W (at UD; Off state)
• Protective circuit/component
  36 V suppressor diode
• Output name
  Signaling current path
• Contact material
  AgNi, gold-flashed, Ag alloy
• Mechanical service life
  approx. 5x 107 cycles
• Recovery time
  1 s (when controlled via A1-A2)
• Relay type
  Electromechanical relay
• Assembly instructions
  See derating curve
• Housing color
  yellow
• pluggable
  Yes
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• Standards/regulations
  DIN EN 50178
• Rated surge voltage/insulation
  Basic insulation 4 kV between all current paths and housing
• ECLASS 10.0.1
  27371819
• ECLASS 6.0
  27371819
Width
17.5 mm
Ambient temperature (operation)
-25 °C ... 60 °C (observe derating)
Air pressure (storage/transport)
79 kPa ... 106 kPa
Rated control supply current IS
typ. 75 mA
Filter time
2 ms (at A1-A2 in the event of voltage dips at Us)
Protective circuit
Surge protection 36 V suppressor diode (A1-A2)33 V suppressor diode (24V-GND)
Current consumption
typ. 20 mA (Input TP1)
Contact type
1 signaling current path
Switching capacity
min. 1 W
Short-circuit protection
no
Typical release time at US
typ. 30 ms (when controlled via A1-A2)
Mounting position
vertical or horizontal
Mounting type
DIN rail mounting
Status display
1 x yellow LED, 1 x green LED, 1 x red LED
Connection method
Screw connection
Rated insulation voltage
250 V AC
Vibration (operation)
10 Hz ... 150 Hz, 2g
Conformance
CE-compliant
ECLASS 5.1
27371901
ETIM 7.0
EC001449
Ambient temperature (storage/transport)
-40 °C ... 65 °C
Conductor cross-section AWG
24 ... 12
Shock
15g, 11 ms
ECLASS 11.0
27371819
ECLASS 9.0
27371819
Utilization restriction
Use in potentially explosive areas is not permitted in China.
Air pressure (operation)
79 kPa ... 106 kPa
Maximum altitude
≤ 2000 m (Above sea level)
Diagnostic supply voltage UD
24 V DC -20 % / +25 %
Description of the input
Test point for proof test
Type of protection
Surge protection
Number of outputs
1 (without delay, floating)
Limiting continuous current
3 A (Observe derating, load type, and on-load voltage)
Sq. Total current
9 A2 (observe derating)
Typical pickup time at US
typ. 100 ms (when controlled via A1-A2)
Nominal operating mode
100% operating factor
Min. degree of protection of inst. location
IP54
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Screw thread
M3
Safety Integrity Level (SIL)
3 (Reference IEC 61508)
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
Depth
114.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Inrush current
max. 800 mA (Δt  100 ms)
Input current at UD
35 mA (at UD = 24 V)
Number of inputs
3
Output description
non-safety-related N/C contact
Switching voltage
min. 16 V AC/DC
Switching frequency
max. 0.5 Hz
Diagnostic threshold
7 Ω ... 20 kΩ (configurable)
Net weight
221.1 g
Degree of protection
IP20
Housing material
Frianyl A 63 R V0
Stripping length
7 mm
Designation
Air clearances and creepage distances between the power circuits
Degree of pollution
2
Environmental simulation test
ISA-S71.04 (G3)
ETIM 6.0
EC001449

Product condition