1015520 Phoenix Contact Electrical Safety Devices

1015520 Product Details

• Height
  112.2 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Depth
  114.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Inrush current
  max. 4.8 A (Δt = 10 ms)
• Filter time
  max. 1.5 ms (Test pulse width of low test pulses)
• Max. permissible overall conductor resistance
  150 Ω
• Cable length
  100 m
• Output description
  PNP
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Power consumption at US
  typ. 1.3 W
• Input name
  External release
• Input current range "0" signal
  0 mA ... 2 mA (S10, S12)
• Output voltage
  ≥ 23 V DC (Us - 1 V)
• Max. capacitive load
  max. 10 µF (2.4 A load)
• Current
  max. 100 mA
• Maximum inrush current
  500 mA (Δt = 1 ms at Us)
• Restart time
  < 250 ms (Boot time)
• Net weight
  108.657 g
• Min. degree of protection of inst. location
  IP54
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 70 °C (observe derating)
Designation
Air clearances and creepage distances between the power circuits
Rated control supply current IS
typ. 54 mA (No load)
Protective circuit
Parallel protection against polarity reversal Suppressor diode Provide external protection, see safety notes. Fuse type: 5 A FF
Protective circuit/component
Suppressor diode
Number of outputs
1
Leakage current
max. 1 mA (in the safe state)
Test pulses
< 120 µs (Test pulse width of low test pulses)
Type of protection
Freewheeling circuit for inductive loads
Typical pickup time at US
< 200 ms (with Us when controlled via A1)
Mounting type
DIN rail mounting
Degree of protection
IP20
Housing material
PBT
Housing color
yellow
Conductor cross-section AWG
24 ... 12
Performance level (PL)
e
Standards/regulations
DIN EN 50178, EN 60947-5-1
Vibration (operation)
10 Hz ... 150 Hz, 5g
ECLASS 10.0.1
27371819
ETIM 7.0
EC001449
Width
12.5 mm
Maximum altitude
≤ 2000 m (Above sea level)
Description of the input
safety-related
Input voltage range "1" signal
11 V DC ... 30 V DC
Current consumption
7 mA
Output name
14, 24
Output current
max. 2.4 A
Min. load current
2 mA
Voltage
approx. 22 V DC (Us - 2 V)
Typical response time at US
< 200 ms (automatic start)
Nominal operating mode
100% operating factor
Protection class
II (EN 50178)
pluggable
Yes
Torque
0.5 Nm ... 0.6 Nm
Safety Integrity Level (SIL)
3
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths and housing
REACh SVHC
Lead 7439-92-1
Shock
30g
Rated control circuit supply voltage US
24 V DC -20 % / +25 % (provide external protection)
Input voltage range "0" signal
0 V DC ... 5 V DC
Number of inputs
1
Concurrence
∞
Output voltage when switched off
< 5 V DC (in the safe state)
Switching frequency
1 Hz (Resistive, inductive, capacitive)
Limitation of the voltage induced on circuit interruption
max. 50 V
Short-circuit protection
Yes
Assembly instructions
See derating curve
Status display
3 x green LED
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Stop category
0
Safety Integrity Level Claim Limit (SIL CL)
3
Overvoltage category
III
ECLASS 9.0
27371819
Ohmic load
min. 12 Ω
Max. inductive load
max. 1 H
Response time
< 10 ms (Take the extension of the response time into consideration if you switch several devices in sequence.)
Recovery time
250 ms (following demand of the safety function)
Mounting position
vertical or horizontal
Operating voltage display
1 x green LED
Connection method
Screw connection
Screw thread
M3
Stripping length
7 mm
Category
4
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 6.0
EC001449
Indication
1 x red LED
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Rated insulation voltage
50 V
Degree of pollution
2
Conformance
CE-compliant
ECLASS 11.0
27371819

Product condition