1015503 Phoenix Contact Electrical Safety Devices

1015503 Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Power consumption at US
  typ. 1.3 W
• Number of inputs
  1
• Max. permissible overall conductor resistance
  150 Ω
• Output name
  14, 24
• Number of outputs
  1
• Min. load current
  2 mA
• Switching frequency
  1 Hz (Resistive, inductive, capacitive)
• Typical pickup time at US
  < 200 ms (with Us when controlled via A1)
• Nominal operating mode
  100% operating factor
• Ambient temperature (operation)
  -40 °C ... 70 °C (observe derating)
• Rated control circuit supply voltage US
  24 V DC -20 % / +25 % (provide external protection)
• Description of the input
  safety-related
• Input voltage range "1" signal
  11 V DC ... 30 V DC
• Concurrence
  ∞
• Output current
  max. 2.4 A
• Ohmic load
  min. 12 Ω
• Limitation of the voltage induced on circuit interruption
  max. 50 V
• Typical response time at US
  < 200 ms (automatic start)
Response time
< 10 ms (Take the extension of the response time into consideration if you switch several devices in sequence.)
Mounting position
vertical or horizontal
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Standards/regulations
DIN EN 50178, EN 60947-5-1
Shock
30g
China RoHS
Environmentally Friendly Use Period = 50 years
Depth
114.5 mm
Inrush current
max. 4.8 A (Δt = 10 ms)
Rated control supply current IS
typ. 54 mA (No load)
Input current range "0" signal
0 mA ... 2 mA (S10, S12)
Output description
PNP
Output voltage when switched off
< 5 V DC (in the safe state)
Type of protection
Freewheeling circuit for inductive loads
Voltage
approx. 22 V DC (Us - 2 V)
Recovery time
250 ms (following demand of the safety function)
Mounting type
DIN rail mounting
Housing material
PBT
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Safety Integrity Level Claim Limit (SIL CL)
3
Rated insulation voltage
50 V
Vibration (operation)
10 Hz ... 150 Hz, 5g
ECLASS 11.0
27371819
ECLASS 9.0
27371819
Height
116.6 mm
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Maximum altitude
≤ 2000 m (Above sea level)
Protective circuit
Parallel protection against polarity reversal Suppressor diode Provide external protection, see safety notes. Fuse type: 5 A FF
Input voltage range "0" signal
0 V DC ... 5 V DC
Current consumption
7 mA
Output voltage
≥ 23 V DC (Us - 1 V)
Max. capacitive load
max. 10 µF (2.4 A load)
Short-circuit protection
Yes
Restart time
< 250 ms (Boot time)
Degree of protection
IP20
Status display
3 x green LED
Connection method
Push-in connection
Indication
1 x red LED
Stop category
0
Category
4
Overvoltage category
III
ECLASS 10.0.1
27371819
Width
12.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Designation
Air clearances and creepage distances between the power circuits
Filter time
max. 1.5 ms (Test pulse width of low test pulses)
Input name
External release
Protective circuit/component
Suppressor diode
Leakage current
max. 1 mA (in the safe state)
Max. inductive load
max. 1 H
Current
max. 100 mA
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Net weight
104.382 g
Min. degree of protection of inst. location
IP54
pluggable
Yes
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Performance level (PL)
e
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths and housing
REACh SVHC
Lead 7439-92-1
ETIM 7.0
EC001449
Degree of pollution
2
Assembly instructions
See derating curve
Operating voltage display
1 x green LED
Conductor cross-section AWG
24 ... 16
Safety Integrity Level (SIL)
3
Conformance
CE-compliant
ETIM 6.0
EC001449

Product condition