0505055 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Material
  Ceramics
• Maximum load current
  125 A (with 35 mm² conductor cross section)
• Nominal current IN
  101 A (with 25 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Bending test rotation speed
  10 (+/- 2) rpm
• Requirements, voltage drop
  U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
• Conductor cross section solid min.
  1 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  25 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  10 mm²
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 11.0
  27141120
• ETIM 2.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
• Overvoltage category
  III
• Power frequency withstand voltage setpoint
  2 kV
• Length
  53 mm
• Tightening torque, min
  3.2 Nm
• Conductor cross section AWG max.
  2
Max. AWG conductor cross section, flexible
3
2 conductors with same cross section, solid min.
0.75 mm²
2 conductors with same cross section, stranded max.
10 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Result of surge voltage test
Test passed
Result of voltage-drop test
Test passed
Potentials
1
Degree of pollution
3
Insulating material
PA
Insulating material group
I
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Tensile test result
Test passed
Result of flexion and pull-out test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Screw thread
M6
Tightening torque max
3.7 Nm
Conductor cross section flexible min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
2 conductors with same cross section, solid max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Number of connections
2
Color
ivory
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Height NS 32
67 mm
Min. AWG conductor cross section, flexible
18
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.75 mm²
Operating temperature
-60 °C ... 180 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 21.0
39121410
UNSPSC 13.2
39121410
Nominal cross section
35 mm²
Maximum power dissipation for nominal condition
4.06 W
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Width
15.3 mm
Stripping length
16 mm
Conductor cross section AWG min.
18
Conductor cross section flexible max.
25 mm²
2 conductors with same cross section, stranded min.
0.75 mm²
Internal cylindrical gage
B7
Ambient temperature (storage/transport)
for a short time, not exceeding 24 h, -60 °C to +70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Connection method
Screw connection
Tight fit on carrier
NS 32
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
35 mm²