0503057 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material
  PA
• Insulating material group
  I
• Open side panel
  Yes
• Conductor cross section solid max.
  16 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.5 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.5 mm²
• Number of connections
  2
• Material
  Ceramics
• Degree of pollution
  3
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Connection method
  Screw connection
• Tightening torque max
  1.8 Nm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Operating temperature
-60 °C ... 180 °C
Potentials
1
Maximum load current
76 A (with 16 mm² conductor cross section)
Nominal voltage UN
630 V (up to 800 V with a conductor cross section of 16 mm²)
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 32
Short-time current
1.92 kA
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Acceleration
5g
Test duration per axis
5 h
Shock duration
30 ms
Stripping length
11 mm
Conductor cross section solid min.
0.5 mm²
Screw thread
M4
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 5.0
27141100
Nominal cross section
10 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.82 W
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
ASD level
1.857 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Width
10.4 mm
Color
ivory
Overvoltage category
III
Nominal current IN
57 A
Result of surge voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Oscillation, broadband noise test result
Test passed
Shock form
Half-sine
Height NS 32
55 mm
Tightening torque, min
1.5 Nm
Conductor cross section AWG max.
6
Relative insulation material temperature index (Elec., UL 746 B)
1000 °C
Length
38 mm
End cover width
4 mm
Connection in acc. with standard
CSA
Conductor cross section flexible max.
10 mm²
2 conductors with same cross section, solid min.
0.5 mm²
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
16 mm²
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
4 mm²
ECLASS 10.0.1
27141120
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 20.0
39121410
ETIM 6.0
EC000897
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
B6
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
2 conductors with same cross section, solid max.
4 mm²
ETIM 3.0
EC000897
2 conductors with same cross section, stranded max.
4 mm²
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Ambient temperature (storage/transport)
for a short time, not exceeding 24 h, -60 °C to +70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
UNSPSC 21.0
39121410
Max. AWG conductor cross section, flexible
8
ECLASS 4.0
27141100