0441517 Phoenix Contact Terminal Blocks

0441517 Product Details

• Tightening torque, min
  0.6 Nm
• Connection in acc. with standard
  CSA
• Length
  42.5 mm
• Static insulating material application in cold
  -60 °C
• Conductor cross section flexible max.
  4 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Height NS 35/15
  54.5 mm
• Tightening torque max
  0.8 Nm
• Conductor cross section AWG min.
  24
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 4.0
  27141100
• ETIM 7.0
  EC000901
• UNSPSC 11
  39121410
• UNSPSC 21.0
  39121410
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• ASD level
  6.12 (m/s2)2/Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
ETIM 2.0
EC000901
Insulating material group
I
ECLASS 10.0.1
27141141
ECLASS 6.0
27141100
ETIM 3.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Maximum power dissipation for nominal condition
1.02 W
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Height NS 35/7,5
47 mm
Conductor cross section solid min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Shock form
Half-sine
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141141
ETIM 6.0
EC000901
UNSPSC 12.01
39121410
Open side panel
No
Test duration per axis
5 h
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
8 mm
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, stranded min.
0.2 mm²
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141141
UNSPSC 6.01
30211811
Overvoltage category
III
Terminal block mounting
0.6 Nm ... 0.8 Nm (PE foot with mounting screw, M3)
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
Screw thread
M3
Conductor cross section solid max.
6 mm²
UNSPSC 19.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 4.0
EC000901
UNSPSC 13.2
39121410
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock duration
18 ms
ECLASS 9.0
27141141
Number of positions
1
Color
green-yellow
Note
Please observe the current carrying capacity of the DIN rails.
Insulating material
PA
Conductor cross section flexible min.
0.2 mm²
ECLASS 4.1
27141100
Number of levels
1
Flammability rating according to UL 94
V0
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Rated surge voltage
8 kV
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Number of connections
2
Nominal cross section
4 mm²
Degree of pollution
3

Product condition