0321019 Phoenix Contact Terminal Blocks
Part#:0321019
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 50
Nov 2, 2024
Disconnect terminal block, connection method: Screw connection, cross section: 0.2 mm² - 4 mm² , AWG: 24 - 12, width: 6.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 0321019 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Bending test turns 135
- Number of levels 1
- Color gray
- Bending test rotation speed 10 (+/- 2) rpm
- Short-time current 0.48 kA
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test duration per axis 5 h
- Shock duration 18 ms
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- End cover width 1 mm
- Conductor cross section flexible min. 0.2 mm²
- 2 conductors with same cross section, solid min. 0.2 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 10.0.1 27141126
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- Conductor cross section short circuit testing 4 mm²
- Test spectrum Service life test category 2, bogie-mounted
- Shock form Semi-sinusoidal
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Height NS 35/15 47.5 mm
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm²
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
- Power frequency withstand voltage setpoint 1.89 kV
- Tight fit on carrier NS 32/NS 35
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Width 6.2 mm
- Note Terminal point
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
- 2 conductors with same cross section, solid max. 1.5 mm²
- Tightening torque max 0.8 Nm
- Screw thread M3
- China RoHS Environmentally Friendly Use Period = 50 years
- UNSPSC 20.0 39121410
- Result of surge voltage test Test passed
- Temperature-rise test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Acceleration 30g
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Length 56.5 mm
- Height NS 32 45 mm
- Conductor cross section flexible max. 4 mm²
- Conductor cross section AWG min. 24
- UNSPSC 6.01 30211811
- UNSPSC 13.2 39121410
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Result of tight fit on support Test passed
- Short circuit stability result Test passed
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- UNSPSC 18.0 39121410
- Rated surge voltage 6 kV
- Maximum power dissipation for nominal condition 1.02 W
- Open side panel Yes
- Overvoltage category III
- Back of the hand protection guaranteed
- Number of connections 2
- Degree of pollution 3
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Insulating material group I
- Maximum load current 26 A (with 4 mm² conductor cross section)
- Insulating material PA
- Nominal current IN 26 A
- Nominal voltage UN 400 V
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 2.5 mm²
- Nominal cross section 4 mm²
- Flammability rating according to UL 94 V0
- Connection in acc. with standard CSA
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Result of flexion and pull-out test Test passed
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- 2 conductors with same cross section, stranded min. 0.2 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Disconnect element M2,6 0.5 Nm 0.6 Nm
- ECLASS 5.0 27141100
- ETIM 4.0 EC000902
- ETIM 7.0 EC000902
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 9.0 27141126
- ETIM 3.0 EC000902
- Tightening torque, min 0.6 Nm
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 6.0 27141100
- ECLASS 5.1 27141100
- UNSPSC 7.0901 39121410
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Height NS 35/7,5 40 mm
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- 2 conductors with same cross section, stranded max. 1.5 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm²
- Stripping length 7 mm
- Connection method Screw connection
- ECLASS 11.0 27141126
- ECLASS 4.1 27141100
- ETIM 6.0 EC000902
- UNSPSC 12.01 39121410
- ECLASS 7.0 27141126
- ETIM 2.0 EC000902
- UNSPSC 21.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$17.51
Stock:
50
Select Qty:
$17.51
$17.51 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨