0311087 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Nominal current IN
  41 A
• Nominal voltage UN
  400 V
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Tractive force setpoint
  90 N
• Conductor cross section tensile test
  10 mm²
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Insulating material
  PA
• Overvoltage category
  III
• Shock protection test specification
  IEC 60529:2001-02
• Result of surge voltage test
  Test passed
• Surge voltage test setpoint
  7.3 kV
• Result of tight fit on support
  Test passed
• Number of connections
  2
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  1.31 W
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Temperature-rise test
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
59 mm
Conductor cross section flexible min.
0.5 mm²
Color
gray
Connection in acc. with standard
CSA
Maximum load current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Requirements, voltage drop
≤ 6,4 mV
Short-time current
1.2 kA
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
72 mm
Conductor cross section solid max.
10 mm²
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded max.
6 mm²
Stripping length
13 mm
Disconnect element
M3 0.6 Nm 0.8 Nm
ECLASS 6.0
27141100
ECLASS 4.0
27141100
ETIM 3.0
EC000902
ETIM 7.0
EC000902
UNSPSC 11
39121410
Nominal cross section
6 mm²
Insulating material group
I
Open side panel
Yes
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Conductor cross section short circuit testing
10 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
8.2 mm
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
UNSPSC 21.0
39121410
Tight fit on carrier
NS 32/NS 35
Note
Terminal point
Tightening torque max
1.5 Nm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 6.0
EC000902
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ETIM 4.0
EC000902
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 32
56.5 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Screw thread
M4
ECLASS 5.0
27141100
UNSPSC 12.01
39121410
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
End cover width
2.2 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
ETIM 2.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Bending test rotation speed
10 rpm
Conductor cross section AWG min.
20
2 conductors with same cross section, solid min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 5.1
27141100
ECLASS 9.0
27141126
UNSPSC 19.0
39121410
Tightening torque, min
1.2 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
Connection method
Screw connection
2 conductors with same cross section, solid max.
2.5 mm²
Height NS 35/7,5
51.5 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section flexible max.
6 mm²