0305080 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Connection in acc. with standard
  CUL
• Open side panel
  Yes
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Tight fit on carrier
  NS 32/NS 35
• Short-time current
  4.1 kA
• Test duration per axis
  5 h
• Number of shocks per direction
  3
• Conductor cross section solid min.
  0.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• 2 conductors with same cross section, solid min.
  0.5 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.5 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  4 mm²
• Tightening torque max
  1.8 Nm
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 10.0.1
  27141120
• ETIM 2.0
  EC000902
• ETIM 6.0
  EC000897
• UNSPSC 6.01
  30211811
UNSPSC 21.0
39121410
Color
gray
Overvoltage category
III
Nominal voltage UN
500 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Requirements, voltage drop
≤ 3.2 mV
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Width
8.2 mm
Conductor cross section solid max.
10 mm²
Conductor cross section AWG max.
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
2 conductors with same cross section, stranded max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ETIM 4.0
EC000902
UNSPSC 12.01
39121410
Number of levels
1
Degree of pollution
3
Maximum power dissipation for nominal condition
1.31 W
Maximum load current
57 A (with 10 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
10 mm²
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Conductor cross section short circuit testing
6 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ECLASS 7.0
27141120
Number of connections
2
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
ASD level
6.12 (m/s2)2/Hz
Rated surge voltage
6 kV
Back of the hand protection
guaranteed
Surge voltage test setpoint
7.3 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of tight fit on support
Test passed
Temperature-rise test
Test passed
Height NS 35/7,5
53.5 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 11
39121410
ETIM 7.0
EC000897
Nominal cross section
6 mm²
Flammability rating according to UL 94
V2
Nominal current IN
41 A
Insulating material group
I
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
5 N
Tractive force setpoint
90 N
Ageing test for screwless modular terminal block temperature cycles
192
Shock form
Half-sine
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Static insulating material application in cold
-40 °C
Connection method
Screw connection
Screw thread
M4
Conductor cross section AWG min.
20
2 conductors with same cross section, stranded min.
0.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Length
61 mm
Conductor cross section flexible max.
6 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Tightening torque, min
1.5 Nm
UNSPSC 19.0
39121410
Stripping length
11 mm