RLK28-55-Z-2466/31/115D Pepperl + Fuchs Electronic Components
Part#:RLK28-55-Z-2466/31/115D
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Retroreflective sensor with polarization filter, Ultra bright LEDs for power on, weak signal indication and switching state, Programmable time function GAN, GAB, IAB, as well as GAN-GAB and GAN-IAB as double function, Not sensitive to ambient light, even
Check out the RLK28-55-Z-2466/31/115D Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Mass 180 g
- Optical face Plastic pane
- Housing Plastic ABS
- Connection 7-pin surface-mounted connector, up to 250 VAC (without cable socket)
- Degree of protection IP65
- Housing depth 65.5 mm
- Storage temperature -40 ... 60 °C (-40 ... 140 °F)
- Housing width 25.8 mm
- Housing height 88 mm
- Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
- Protection class II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit insulated from control circuit in accordance with IEC 61140., Caution!, The protection class 2 is only valid when the terminal compartment is closed
- Product standard EN 60947-5-2
- EAC conformity TR CU 020/2011
- Switching frequency 25 Hz
- Timer function ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-one shot (GAN-IAB), ON delay-OFF delay (GAN-GAB), programmable, adjustment interval 0.1 ... 10 s
- Response time 20 ms
- Switching current max. 2 A
- Switching power DC: max. 50 W AC: max. 500 VA
- Switching voltage max. 250 V AC/DC
- Signal output Relay, 1 alternator
- Switching type light/dark on, switchable (selectable, light/dark switching is only activated if the receiver has 'dark on' selected.)
- Mission Time (TM) 20 a
- Operation indicator LED green
- Power consumption ≤ 3.5 VA
- Control elements sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch
- Operating voltage 12 ... 240 V AC/DC
- Function indicator 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted
- Diagnostic Coverage (DC) 0 %
- Ambient light limit 80000 Lux
- MTTFd 600 a
- Threshold detection range 21 m,
- Effective detection range 0 ... 17 m
- Polarization filter yes
- Reference target H85-2 reflector
- Reflector distance 0.05 ... 17 m
- Opening angle emitter 1.2°, receiver 2°
- Diameter of the light spot approx. 290 mm at a distance of 17 m
- Light type modulated visible red light , 660 nm
- Light source LED
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents RLK28-55-Z-2466/31/115D Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
