RLG28-55-7462 Pepperl + Fuchs Electronic Components
Part#:RLG28-55-7462
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Retroreflective area sensor with 6 beams in a widely used standard photoelectric housing, red light, 4 m detection range, light/dark on switchable, push-pull output, M12 plug, Retro-reflective area sensor with 6 light beams in standard photoelectric-senso
Check out the RLG28-55-7462 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Degree of protection IP67
- Housing Plastic ABS
- Optical face Plastic pane
- Mass 100 g
- Connection 4-pin, M12 x 1 connector
- Housing depth 54.3 mm
- Housing height 88 mm
- CCC approval CCC approval / marking not required for products rated ≤36 V
- Storage temperature -40 ... 70 °C (-40 ... 158 °F)
- Housing width 25.8 mm
- UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
- Ambient temperature -10 ... 40 °C (14 ... 104 °F),
- EAC conformity TR CU 020/2011
- Product standard EN 60947-5-2
- Voltage drop ≤ 2.5 V DC
- Response time 1 ms
- Switching current max. 100 mA
- Switching frequency 230 Hz
- Operating voltage 12 ... 30 V DC,
- Switching voltage max. 30 V DC
- Stability alarm output 1 Push-pull output, active when there is sufficient operating reserve, inactive when there insufficient operating reserve, alternates for at least 10 s when the signal quality is poor (to check alignment and perform teach-in)
- No-load supply current max. 50 mA
- Switching type light/dark on, switchable
- Ripple max. 10 %
- Signal output 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
- Control elements rotary switch for light/dark , Teach-In key
- Function indicator 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted, Teach-In : LED yellow/green; equiphase flashing; 2,5 Hz,
- Operation indicator LED green, statically lit Power on, Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz), short-circuit : LED green flashing (approx. 4 Hz)
- Resolution 12 mm
- Mission Time (TM) 20 a
- MTTFd 310 a
- Ambient light limit 5000 Lux
- Readjustment Receiver readjustment active after > 30 seconds
- Diagnostic Coverage (DC) 0 %
- Opening angle +/- 2.5 °
- Polarization filter yes
- Diameter of the light spot approx. 220 mm at detection range 4 m
- Threshold detection range 5.6 m
- Sensing range typical 60 mm , Object has to cover the refelector completely in one dimension
- Reference target Reflector A80 H85-2 reflector Foil reflector OFR-100/100
- Reflector distance Reflector A80: 0.4 ... 4 m , H85-2 reflector: 0.2 ... 4 m , Foil reflector OFR-100/100: 0.4 ... 3 m
- Number of beams 6
- Light type modulated visible red light , 625 nm
- Effective detection range 0 ... 4 m
- Light source LED
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents RLG28-55-7462 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨