OMT300-R200-IEP-IO-0,3M-V31-L Pepperl + Fuchs Electronic Components
Part#:OMT300-R200-IEP-IO-0,3M-V31-L
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Distance sensor, Medium design with versatile mounting options, Space-saving distance sensors in small standardized design, Multi Pixel Technology (MPT) - exact and precise signal evaluation, IO-Link interce for service and process data, Analog output 4 .
Check out the OMT300-R200-IEP-IO-0,3M-V31-L Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Cable length 0.3 m
- Optical face PMMA
- Degree of protection IP67 / IP69 / IP69K
- Mass approx. 41 g
- Connection fixed cable 300 mm with M8 x 1 male connector; 4-pin
- Housing PC (Polycarbonate)
- Housing depth 41.7 mm
- Housing height 50.6 mm
- Housing width 15 mm
- Ambient temperature 10 ... 50 °C (50 ... 122 °F)
- Storage temperature -40 ... 70 °C (-40 ... 158 °F)
- FDA approval IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
- Repeat accuracy < 0.5 %
- EAC conformity TR CU 020/2011
- UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
- CCC approval CCC approval / marking not required for products rated ≤36 V
- Linearity error 0.5 %
- Temperature drift 0.05 %/K
- Warm up time 5 min
- Communication interface IEC 61131-9
- Laser safety EN 60825-1:2014
- Recovery time 2 ms
- Product standard EN 60947-5-2
- Response time 2 ms
- Load resistor > 1 kΩ voltage output ; ≤ 470 Ω current output
- Voltage drop ≤ 1.5 V DC
- Usage category DC-12 and DC-13
- Output type 1 current output: 4 ... 20 mA
- Switching current max. 100 mA , resistive load
- Switching voltage max. 30 V DC
- Signal output 1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof
- Switching type The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, I—Pin2: analog output 4...20 mA
- Compatible master port type A
- SIO mode support yes
- Process data width Process data input 4 byte, Process data output 2 bits
- Min. cycle time 3 ms
- Transfer rate COM2 (38.4 kBit/s)
- Device profile Identification and diagnosis, Smart Sensor type 0/type 3.3
- Device ID 0x11190B (1120523)
- IO-Link revision 1.1
- Ripple max. 10 %
- Function indicator LED yellow: constantly on - switch output active, constantly off - switch output inactive
- Interface type IO-Link ( via C/Q = pin 4 )
- Protection class III
- Control elements Teach-In key
- No-load supply current < 18 mA at 24 V supply voltage
- Operating voltage 18 ... 30 V DC
- Operation indicator LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
- MTTFd 470 a
- Mission Time (TM) 20 a
- Resolution 0.1 mm
- Diagnostic Coverage (DC) 0 %
- Ambient light limit EN 60947-5-2 : 45000 Lux
- Angle deviation max. +/- 1.5 °
- Opening angle approx. 0.3 °
- max. pulse energy < 40 nJ
- Diameter of the light spot approx. 3 mm at a distance of 300 mm
- Repetition rate approx. 2.4 kHz
- Pulse length 5.5 µs
- Wave length 680 nm
- Light type modulated visible red light
- Light source laser diode
- Laser class 1
- Note LASER LIGHT , DO NOT STARE INTO BEAM
- Reference target standard white, 100 mm x 100 mm
- Measurement range 100 ... 300 mm
- Beam divergence > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents OMT300-R200-IEP-IO-0,3M-V31-L Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
