OMT100-R101-2EP-IO-L Pepperl + Fuchs Electronic Components
Part#:OMT100-R101-2EP-IO-L
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Distance sensor, Measurement to object, 100 mm detection range, red laser light, laser class 1, measured value via IO-Link, 2 x push-pull output, 2 m fixed cable, Miniature design with versatile mounting options, Space-saving distance sensors in small sta
Check out the OMT100-R101-2EP-IO-L Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Cable length 2 m
- Connection 2 m fixed cable
- Mass approx. 36 g
- Housing PC (Polycarbonate)
- Optical face PMMA
- Degree of protection IP67 / IP69 / IP69K
- Housing depth 18.3 mm
- Housing width 13.9 mm
- Storage temperature -40 ... 70 °C (-40 ... 158 °F)
- Housing height 41.4 mm
- UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
- FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
- EAC conformity TR CU 020/2011
- Linearity error ± 0,75 %
- Temperature drift 0.03 %/K
- Ambient temperature 10 ... 60 °C (50 ... 140 °F)
- Repeat accuracy ≤ 0.5 %
- Warm up time 5 min
- Laser safety EN 60825-1:2014
- Product standard EN 60947-5-2
- Communication interface IEC 61131-9
- Switching current max. 100 mA , resistive load
- Response time 2 ms
- Voltage drop ≤ 1.5 V DC
- Usage category DC-12 and DC-13
- Switching type The default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link, Q2 - WH: NPN normally open, PNP normally closed
- Switching voltage max. 30 V DC
- Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
- Compatible master port type A
- SIO mode support yes
- Process data width Process data input 3 Byte, Process data output 2 Bit
- Min. cycle time 3 ms
- Transfer rate COM2 (38.4 kBit/s)
- Device profile Smart Sensor
- Protection class III
- Device ID 0x110904 (1116420)
- IO-Link revision 1.1
- Interface type IO-Link ( via C/Q = pin 4 )
- Ripple max. 10 %
- No-load supply current < 25 mA at 24 V supply voltage
- Control elements Teach-In key
- Function indicator LED yellow: constantly on - switch output active, constantly off - switch output inactive
- Operating voltage 10 ... 30 V DC
- Operation indicator LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
- Diagnostic Coverage (DC) 0 %
- Angle deviation max. +/- 1.5 °
- Ambient light limit EN 60947-5-2 : 30000 Lux
- MTTFd 560 a
- Opening angle approx. 2 °
- Resolution 0.1 mm
- Mission Time (TM) 20 a
- Diameter of the light spot approx. 3 mm at a distance of 100 mm
- max. pulse energy 15.2 nJ
- Repetition rate approx. 3 kHz
- Reference target standard white, 100 mm x 100 mm
- Note LASER LIGHT , DO NOT STARE INTO BEAM
- Measurement range 40 ... 100 mm
- Laser class 1
- Light type modulated visible red light
- Beam divergence > 5 mrad d63 d63 < 1 mm in the range of 50 mm ... 250 mm
- Pulse length 3 µs
- Wave length 680 nm
- Light source laser diode
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents OMT100-R101-2EP-IO-L Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨