OBE500-R3F-SE2-0,2M-V31-L Pepperl + Fuchs Electronic Components
Part#:OBE500-R3F-SE2-0,2M-V31-L
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Thru-beam sensor (pair), Thru-beam sensor, flat design, M3 mounting, 500 mm detection range, red light, dark on, PNP output, with 0.2 m fixed cable and M8 plug, 4-pin, Very flat design for direct mounting without mounting bracket, DuraBeam Laser Sensors -
Check out the OBE500-R3F-SE2-0,2M-V31-L Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Cable length 200 mm
- Tightening torque, fastening screws 1 Nm
- Mass approx. 10 g per sensor
- Cable PUR
- Housing PC (Polycarbonate) and Stainless steel
- Storage temperature -20 ... 70 °C (-4 ... 158 °F)
- Ambient temperature -10 ... 60 °C (14 ... 140 °F)
- Housing height 25.5 mm
- Degree of protection IP67
- Connection 200 mm fixed cable with 4-pin, M8x1 connector
- Housing width 16 mm
- Housing depth 4.1 mm
- FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
- CCC approval CCC approval / marking not required for products rated ≤36 V
- UL approval E87056 , cULus Recognized, Class 2 Power Source
- EAC conformity TR CU 020/2011
- Product standard EN 60947-5-2
- Voltage drop ≤ 1.5 V DC
- Response time 250 µs
- Standards EN 60947-5-2:2007 EN 60947-5-2/A1:2012 EN 60825-1:2007 UL 60947-5-2: 2014
- Switching frequency approx. 2 kHz
- Switching current max. 50 mA , resistive load
- Switching voltage max. 30 V DC
- Protection class III
- Signal output 1 PNP output, short-circuit protected, reverse polarity protected, open collector
- Test input Test of switching function at 0 V
- Switching type NO contact / dark-on
- Switching threshold Teach-In input
- Operating voltage 12 ... 24 V
- No-load supply current Emitter: ≤ 10 mA, Receiver: ≤ 8 mA
- Ambient light limit EN 60947-5-2 : 25000 Lux
- Function indicator Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
- Operation indicator LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
- Diagnostic Coverage (DC) 0 %
- MTTFd 806 a
- Mission Time (TM) 20 a
- Optical face frontal
- Opening angle approx. 1 °
- Diameter of the light spot approx. 4 mm at a distance of 500 mm
- Angle deviation approx. 0.5 °
- Beam divergence > 5 mrad
- Object size typ. starts from 0.5 mm ; typ. from 0.25 mm (after teach-in)
- Repetition rate approx. 16.6 kHz
- max. pulse energy 8 nJ
- Wave length 680 nm
- Note LASER LIGHT , DO NOT STARE INTO BEAM
- Laser class 1
- Pulse length approx. 3 µs
- Light type modulated visible red light , 680 nm
- Light source LASER LIGHT
- Receiver OBE500-R3F-E2-0,2M-V31-L
- Threshold detection range 700 mm,
- Emitter OBE500-R3F-S-0,2M-V31
- Effective detection range 0 ... 500 mm,
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents OBE500-R3F-SE2-0,2M-V31-L Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
