Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

NRB20-U1-E2-IO Pepperl + Fuchs Electronic Components

Pepperl + Fuchs NRB20-U1-E2-IO Inductive sensor, Reduction ctor 1, magnetic field resistant, Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Rated operating distance: 20 mm (ctory setting), Installation: flush, Output polarity: DC, Output type: 3-wire,
Pepperl + Fuchs

Part#:NRB20-U1-E2-IO

Manufacturer:Pepperl + Fuchs

Product Lifecycle:Active

Get a quick Quote!

Inductive sensor, Reduction ctor 1, magnetic field resistant, Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Rated operating distance: 20 mm (ctory setting), Installation: flush, Output polarity: DC, Output type: 3-wire,

Check out the NRB20-U1-E2-IO Pepperl + Fuchs price in the box on the right side or send a quick quote.

Product Details

  • Mass
    275 g
  • Default setting
    operating mode = switch point mode with stability alarm, switching function = Normally open (NO), switching distance = 20 mm
  • Note
    Tightening torque: 1.8 Nm (housing)
  • Degree of protection
    IP67
  • Housing base
    plastic
  • Housing material
    PA/metal with epoxy powder coating
  • Sensing face
    PA
  • Maximum core cross-section
    without wire end ferrule 2.5 mm2, with connector sleeves 1.5 mm2
  • Minimum core cross-section
    without wire end ferrule 0.5 mm2, with connector sleeves 0.34 mm2
  • Core cross section
    up to 2.5 mm2
  • Information for connection
    A maximum of two conductors with the same core cross section may be mounted on one terminal connection!, tightening torque 1.2 Nm + 10 %
  • Connection type
    screw terminals
  • Storage temperature
    -40 ... 85 °C (-40 ... 185 °F)
  • Ambient temperature
    -25 ... 70 °C (-13 ... 158 °F)
  • Rated insulation voltage
    60 V
  • Standards
    EN 60947-5-2:2007, EN 60947-5-2/A1:2012, IEC 60947-5-2:2007, IEC 60947-5-2 AMD 1:2012
  • Rated impulse withstand voltage
    800 V
  • CCC approval
    CCC approval / marking not required for products rated ≤36 V
  • UL approval
    cULus Listed, General Purpose, Class 2 power source
  • Protection class
    II
  • SIO mode support
    yes
  • Compatible master port type
    A
  • Process data width
    Process data input (control system side): 2 Bit, Process data output (control system side): none
  • Min. cycle time
    2.3 ms
  • Transfer rate
    COM2 (38.4 kBit/s)
  • IO-Link revision
    1.1
  • Interface type
    IO-Link ( via C/Q = terminal 4 )
  • Device ID
    0x201005 (2101253)
  • Diagnostic Coverage (DC)
    0 %
  • MTTFd
    701 a
  • Mission Time (TM)
    20 a
  • Operating voltage indicator
    LED, green
  • Short-circuit protection
    pulsing
  • Constant magnetic field
    200 mT
  • Status indicator
    LED, yellow
  • Alternating magnetic field
    200 mT
  • No-load supply current
    ≤ 20 mA
  • Time delay before availability
    max. 150 ms
  • Off-state current
    0 ... 0.5 mA typ. 60 µA at 25 °C
  • Hysteresis
    typ. 3 %
  • Voltage drop
    ≤ 0.5 V
  • Operating current
    0 ... 200 mA
  • Reverse polarity protection
    reverse polarity protected
  • Switching frequency
    0 ... 440 Hz (switch point mode), 0 ... 10 Hz (window mode, switch point mode with stability alarm)
  • Reduction factor rSt37
    1
  • Operating voltage
    10 ... 30 V DC
  • Reduction factor r304
    1
  • Rated operating distance
    20 mm (factory setting)
  • Switching function
    Normally open/closed (NO/NC) programmable
  • Output type
    PNP
  • Reduction factor rAl
    1
  • Near operating distance
    15 mm (can be activated by software)
  • Installation
    flush
  • Assured operating distance
    0 ... 16.2 mm
  • Output polarity
    DC
  • Reduction factor rCu
    1

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents NRB20-U1-E2-IO Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Pepperl + Fuchs

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Pepperl + Fuchs Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo