MLV12-54-LAS/76B/110/115 Pepperl + Fuchs Electronic Components
Part#:MLV12-54-LAS/76B/110/115
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Retroreflective sensor, Laser retroreflective sensor, small design, polarization filter, 21 m detection range, laser red light, light/dark on, push-pull output, test input, fixed cable, Series of sensors in a widely used standard housing, Visible red ligh
Check out the MLV12-54-LAS/76B/110/115 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Mass 60 g
- Optical face Plastic pane
- Connection 2500 mm fixed cable , PUR
- Housing Frame: nickel plated, die cast zinc,, Laterals: glass-fiber reinforced plastic PC
- Degree of protection IP67
- Housing depth 15 mm
- Ambient temperature -10 ... 50 °C (14 ... 122 °F)
- Storage temperature -20 ... 65 °C (-4 ... 149 °F)
- Housing width 41.5 mm
- Housing height 49 mm
- CCC approval CCC approval / marking not required for products rated ≤36 V
- EAC conformity TR CU 020/2011
- Vibration resistance IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
- UL approval cULus Listed, Type 1 enclosure
- Shock and impact resistance IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
- Switching current max. 0.1 A
- Protection class II, rated voltage ≤ 300 V AC with pollution degree 1-2 according to IEC 60664-1
- Product standard EN 60947-5-2
- Response time 0.2 ms
- Laser safety IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
- Switching frequency 2500 Hz
- Voltage drop ≤ 2.5 V DC
- Switching voltage max. 30 V DC
- Switching type light/dark on switchable
- Signal output 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
- No-load supply current max. 40 mA
- Ripple max. 10 %
- Test input emitter deactivation at 0 V
- Function indicator 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted
- Control elements rotary switch for light/dark, sensitivity adjuster
- Operating voltage 10 ... 30 V DC
- Operation indicator LED green, flashes in case of short-circuit
- Mission Time (TM) 10 a
- Diagnostic Coverage (DC) 90 %
- MTTFd 930 a
- Opening angle 0.02 °
- Modulated light 5000 Lux
- Diameter of the light spot approx. 5 mm x 12 mm at 15 m detection range
- max. pulse energy 6.7 nJ
- Pulse length 1.8 µs
- Continuous light 50000 Lux
- Repetition rate 17.86 kHz
- Effective detection range 0 ... 12 m
- Beam divergence < 1.5 mrad
- Wave length 650 nm
- Light source laser diode
- Laser class 1
- Light type modulated visible red light
- Reference target MH82 reflector
- Reflector distance 0 ... 12 m
- Polarization filter yes
- Note LASER LIGHT , DO NOT STARE INTO BEAM
- Threshold detection range 17 m
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents MLV12-54-LAS/76B/110/115 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
