HIC2873 Pepperl + Fuchs Electronic Components
Part#:HIC2873
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Solenoid Driver, 1-channel isolated barrier, 24 V DC supply (bus or loop powered), Output 40 mA at 12 V DC, 55 mA current limit, Contact or logic control input, Entity parameter Io/Isc = 110 mA, Line ult detection (LFD), Test pulse immunity, Up to SIL 2 a
Check out the HIC2873 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- IECEx certificate IECEx CES 10.0017, IECEx KIWA 15.0018X
- Certificate KIWA 15 ATEX 0036 X
- Control drawing 116-0431 (cFMus)
- Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- IECEx marking [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I, Ex ec IIC T4 Gc
- Maximum safe voltage 253 V AC (Attention! Umis no rated voltage.)
- Output Ex ia Ga, Ex ia Da, Ex ia Ma
- Marking
II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I - Power 693 mW
- EU-type examination certificate CESI 10 ATEX 046
- Coding pin 1 and 4 trimmed, For further information see system description.
- Degree of protection IEC 60529:2001
- Dimensions 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
- Mounting on termination board
- Mass approx. 100 g
- Configuration via DIP switches
- Labeling space for labeling at the front
- Electromagnetic compatibility NE 21:2006, For further information see system description.
- Control elements DIP switch
- Fault current 4 mA pulsing (20 ms ON, 200 ms OFF)
- Energized/De-energized delay - bus powered: filter OFF: 1 ms, filter ON: 10 ms, - loop powered: switch-on 50 ms, switch-off 6 ms (300 Ω load)
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Display elements LEDs
- Output/power supply, inputs, and collective error safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V
- Fault level lead short-circuit detection at < 25 Ω, lead breakage detection at > 100 kΩ typical
- Load nominal 0.1 ... 5 kΩ
- Open loop voltage approx. 22.5 V
- Output type open collector transistor (internal fault bus)
- Current limit 55 mA
- Internal resistor approx. 240 Ω
- Voltage ≥ 12 V
- Current ≤ 40 mA
- Signal level 1-signal: 15...30 V DC (current limited at 3 mA) or contact close (internal 10 kΩ pull-up), 0-signal: 0...5 V DC or contact open
- Inrush current 0.2 A , 15 ms loop powered
- Switching frequency - bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz, - loop powered: max. 10 Hz
- Signal type Digital Output
- Rated voltage 20.4 ... 30 V DC loop powered, 20.4 ... 30 V DC bus powered via Termination Board
- Input current 62 mA at 24 V, 300 Ω load
- Connection side control side
- Safety Integrity Level (SIL) SIL 3
- Connection SL1: 1a, 1b(-); 2a, 2b(+)
- Control input external switch (dry contact or open collector) non isolated or logic signal input fully floating
- Power dissipation 1 W at 24 V, 300 Ω load
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents HIC2873 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
