​
Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

MCDLN31NE Panasonic Motion Controllers

Panasonic MCDLN31NE Panasonic MCDLN31NE is an AC Servo Drive belonging to the C-frame - Basic type sub-range. It features an IGBT PWM Sinusoidal wave drive control method, with a built-in regenerative resistor, although an external resistor can be connected if needed. This part also includes a built-in dynamic brake and supports various control modes such as Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It utilizes the USB Realtime Express (RTEX) communication protocol for efficient data transfer. The MCDLN31NE operates with a rated current of 22 A and can function within an ambient air temperature range of 0-55 °C. It is designed for single-phase input networks and includes 2 x analog monitor outputs for analog signals. The operating mode follows the RTEX interface specification, and it is equipped with 8 x control signal inputs and 5 x control signal outputs, including 3 x general control signal outputs and 2 x line driver pulse signal outputs. The supply voltage required for operation is 100 V.
Panasonic

Part#:MCDLN31NE

Manufacturer:Panasonic

Product Lifecycle:Active

Get a quick Quote!

Panasonic MCDLN31NE is an AC Servo Drive belonging to the C-frame - Basic type sub-range. It features an IGBT PWM Sinusoidal wave drive control method, with a built-in regenerative resistor, although an external resistor can be connected if needed. This part also includes a built-in dynamic brake and supports various control modes such as Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It utilizes the USB Realtime Express (RTEX) communication protocol for efficient data transfer. The MCDLN31NE operates with a rated current of 22 A and can function within an ambient air temperature range of 0-55 °C. It is designed for single-phase input networks and includes 2 x analog monitor outputs for analog signals. The operating mode follows the RTEX interface specification, and it is equipped with 8 x control signal inputs and 5 x control signal outputs, including 3 x general control signal outputs and 2 x line driver pulse signal outputs. The supply voltage required for operation is 100 V.

About the manufacturer: Panasonic is one of the manufacturers that offers Motion Controllers that you can order at Quotebeam.com. Panasonic is a leading supplier of cutting-edge automation control solutions that are both advanced and cost-effective. With a significant presence in a variety of industrial sectors globally, including automotive, semiconductor, packaging, and OEMs, our product lineup features PLCs, HMI, and other offerings.

Check out the MCDLN31NE Panasonic price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

MCDLN31NE Description

Panasonic MCDLN31NE is an AC Servo Drive belonging to the C-frame - Basic type sub-range. It features an IGBT PWM Sinusoidal wave drive control method, with a built-in regenerative resistor, although an external resistor can be connected if needed. This part also includes a built-in dynamic brake and supports various control modes such as Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It utilizes the USB Realtime Express (RTEX) communication protocol for efficient data transfer. The MCDLN31NE operates with a rated current of 22 A and can function within an ambient air temperature range of 0-55 °C. It is designed for single-phase input networks and includes 2 x analog monitor outputs for analog signals. The operating mode follows the RTEX interface specification, and it is equipped with 8 x control signal inputs and 5 x control signal outputs, including 3 x general control signal outputs and 2 x line driver pulse signal outputs. The supply voltage required for operation is 100 V.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Panasonic

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Panasonic Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Panasonic Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Panasonic, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

MCDLT35SF Part Image. Manufactured by Panasonic.

MCDLT35SF

Verified stock: 0

Panasonic MCDLT35SF is an AC Servo Drive within the C-frame - Multi function type sub-range, designed to offer a variety of control methods including IGBT PWM Sinusoidal wave drive, with a comprehensive suite of safety and control functions. These functions encompass a built-in regenerative resistor, with the option to connect an external resistor, and a built-in dynamic brake. It supports position, speed, torque, combined position/speed, combined position/torque, combined speed/torque, and full-closed control. The device is compatible with USB, RS232, and RS485 communication protocols and is equipped with protection features against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder errors. It operates with a rated current of 22 A and can function in ambient air temperatures ranging from 0 to 55 °C. The MCDLT35SF is designed for both single or three-phase input networks and includes 2 x analog monitor outputs, 10 x control signal inputs, 1 x Photo-coupler pulse signal input, 1 x line receiver pulse signal input for digital inputs, and 6 x control signal outputs, 3x line driver pulse signal output, 1 x open collector pulse signal output for digital outputs. It also features 1 x 16-bit A/D analog input and 2 x 12-bit A/D analog inputs, operates on a 200 V supply voltage, and utilizes an LED for status indication. Its operating mode is based on analog/pulse I/f specification.

Panasonic

MCDLT35NF Part Image. Manufactured by Panasonic.

MCDLT35NF

Verified stock: 0

Panasonic MCDLT35NF is an AC Servo Drive belonging to the C-frame - Multi function type sub-range. It features an IGBT PWM Sinusoidal wave drive control method, incorporating a safety function, a built-in regenerative resistor with the option to connect an external resistor, and a built-in dynamic brake. This servo drive supports various control modes including Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It utilizes the USB Realtime Express (RTEX) communication protocol for efficient data transfer. The MCDLT35NF operates with a rated current of 22 A and can function within an ambient air temperature range of 0-55 °C. It is designed for use with either single or three-phase input networks and includes 2 x analog monitor outputs for analog signals. The operating mode is specified for RTEX interface, and it features 8 x control signal inputs and 5 x control signal outputs, including 3 x general control signal outputs and 2 x line driver pulse signal outputs. The supply voltage required for operation is 200 V.

Panasonic

MCDLT31SF Part Image. Manufactured by Panasonic.

MCDLT31SF

Verified stock: 0

Panasonic MCDLT31SF is an AC Servo Drive within the C-frame - Multi function type sub-range, designed to offer a variety of control methods including IGBT PWM Sinusoidal wave drive, with a comprehensive suite of safety and control functions. These functions encompass a built-in regenerative resistor, with the option to connect an external resistor, and a built-in dynamic brake. It supports position, speed, torque, combined position/speed, combined position/torque, combined speed/torque, and full-closed control. The device facilitates communication via USB, RS232, and RS485 protocols and is equipped with protection features against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder errors. It operates with a rated current of 22 A and can function within an ambient air temperature range of 0-55 °C. Designed for single-phase input networks, it includes 2 x analog monitor outputs, operates in analog/pulse mode, and features 10 x control signal inputs, 1 x Photo-coupler pulse signal input, 1 x line receiver pulse signal input for digital inputs, along with 6 x control signal outputs, 3x line driver pulse signal output, and 1 x open collector pulse signal output for digital outputs. The servo drive also has 1 x 16-bit A/D analog input and 2 x 12-bit A/D analog inputs, requires a supply voltage of 100 V, and uses an LED to indicate status.

Panasonic

MCDLT31NF Part Image. Manufactured by Panasonic.

MCDLT31NF

Verified stock: 0

Panasonic MCDLT31NF is an AC Servo Drive within the C-frame - Multi function type sub-range. It features an IGBT PWM Sinusoidal wave drive control method, along with a built-in safety function and regenerative resistor, with the option to connect an external resistor. This model also includes a built-in dynamic brake and supports various control modes including Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It utilizes the USB Realtime Express (RTEX) communication protocol, operates with a rated current of 22 A, and is designed for use in ambient air temperatures ranging from 0 to 55 °C. The MCDLT31NF is suitable for single phase input networks, offers 2 x analog monitor outputs, operates in RTEX mode, and includes 8 x control signal inputs and 5 x control signal outputs, of which 2 are line driver pulse signal outputs. It requires a supply voltage of 100 V.

Panasonic

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo