This item can ship within 24h!

FX-301P

$156.06

Panasonic FX-301P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED for illumination. It is equipped with functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.5ms to 500ms, and a one-shot timer for enhanced control. The case cover is made from polycarbonate, while the housing utilizes heat-resistant ABS material. This part comes pre-equipped with a connector for easy installation. It includes protection features like outputs short-circuit protection to ensure durability and longevity. The FX-301P operates at a wavelength of 650 nm and can function within an ambient air temperature range of -10 to +55°C. It supports both Light-ON and Dark-ON operating modes. The current consumption is 30mA (0.03 A) under normal conditions and 24mA (0.024 A) in Eco mode, both at 24Vdc. It offers a digital output (PNP open-collector / 24Vdc / 100mA) and has a variable response time from 35µs (0.000035 s) in H-SP mode to 2ms (0.002 s) in LONG mode. The visual position indicator includes an orange LED for operation, a green LED for stability, and additional LEDs for various modes. A 4-digit red LED display provides clear readouts, and the power consumption is 0.96 W in normal mode and 0.84 W in Eco mode.

Panasonic

This item can ship within 24h!

PM-T44

$21.54

Verified stock: 138

Panasonic PM-T44 is a compact U-shaped (fork type) photoelectric sensor designed for a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is connected via a pre-wired 3m 4-core 0.09mm2 cabtyre PVC cable with bare flying leads. This sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared (IR) light with a wavelength of 855 nm for detection. The PM-T44 is equipped with two digital outputs (NPN open-collector / 24Vdc / 50mA), supporting both Light-ON and Dark-ON functions, and has a rapid response time of 80µs. An orange LED serves as a visual position indicator, and the sensor has a current consumption of 15mA. It is capable of detecting objects as small as 0.8x1.2mm.

Panasonic

This item can ship within 24h!

SL-CP1

$32.64

Verified stock: 808

Panasonic SL-CP1 is a 4-pin snap male connector designed for use in various automation applications. This connector comes in white and is specifically engineered to facilitate secure and straightforward connections within automated systems.

Panasonic

This item can ship within 24h!

GX-F8A

$22.85

Verified stock: 863

Panasonic GX-F8A is a rectangular inductive proximity sensor featuring a built-in amplifier. It is constructed with a PBT housing and comes pre-wired with a 1-meter 3-core 0.15mm2 cabtyre cable that is resistant to heat, cold, and oil, terminating in bare flying leads. This sensor operates within an ambient air temperature range of -25 to +70°C and offers a degree of protection rated at IP68G. It operates in a normally open (NO) mode at a standard frequency, with a current consumption of 15mA (0.015 A). The GX-F8A has a sensing distance of 0mm to 2.1mm and a sampling rate of 500 Hz. It includes 1 digital output (NPN open-collector / 24Vdc / 100mA) and features an orange LED as a visual position indicator. The sensor is designed to detect objects of the size of an iron sheet measuring 15x15x1mm.

Panasonic

This item can ship within 24h!

CN-70

$15.30

Verified stock: 316

Panasonic CN-70 is a connector designed for non-linear connections, facilitating the linkage between the main unit and the fiber sensor. It features a one-touch connector system for easy and quick connection to other devices.

Panasonic

This item can ship within 24h!

CX-411

$93.84

Verified stock: 184

Panasonic CX-411 is a compact photoelectric thru-beam sensor emitter and receiver pair designed for detecting objects with a minimum size of 12mm from up to 10 meters away. It is constructed with a PBT housing and an acrylic lens, ensuring durability within ambient air temperatures ranging from -25 to +55°C. This sensor is equipped with an orange LED for operation indication, a green LED for stability, and another green LED for power indication, facilitating easy monitoring. It operates with a red light of 680 nm wavelength and boasts a rapid response time of 1ms / 0.001 s. For connectivity, it features a pre-wired 2m 3-core (2-core on emitter side) 0.2mm2 cabtyre cable with bare end flying leads. The CX-411 offers a digital output (NPN open-collector / 24Vdc / 100mA) and supports both Light-ON and Dark-ON operating modes. It is designed to meet IP67 protection standards, ensuring protection against dust and water ingress.

Panasonic

This item can ship within 24h!

EX-FC1

$266.22

Verified stock: 323

Panasonic EX-FC1 is a connector designed with an ABS housing material, featuring a current consumption of 135mA / 0.135 A. It is equipped with a visual position indicator comprising eight green LEDs, one for each connected sensor, and an orange LED that illuminates when the output is ON. This part serves as a wire-saving unit and comes pre-wired with a 2m 3-core PVC cabtyre cable, terminated with bare flying leads. The total length of the cable is 2m.

Panasonic

This item can ship within 24h!

FT-KV26

$285.60

Verified stock: 1,198

Panasonic FT-KV26 is a fiber sensor designed as an emitter+receiver pair with a narrow beam. It features a head dimension of 1.5x2mm and a beam axis diameter of 1mm. The total length of the sensor is 2m. It operates within an ambient air temperature range of -40 to +80°C and offers a degree of protection rated at IP30. The minimum bending radius for this sensor is R2.

Panasonic

This item can ship within 24h!

FX-301P

$156.06

Verified stock: 607

Panasonic FX-301P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED for illumination. It is equipped with functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.5ms to 500ms, and a one-shot timer for enhanced control. The case cover is made from polycarbonate, while the housing utilizes heat-resistant ABS material. This part comes pre-equipped with a connector for easy installation. It includes protection features like outputs short-circuit protection to ensure durability and longevity. The FX-301P operates at a wavelength of 650 nm and can function within an ambient air temperature range of -10 to +55°C. It supports both Light-ON and Dark-ON operating modes. The current consumption is 30mA (0.03 A) under normal conditions and 24mA (0.024 A) in Eco mode, both at 24Vdc. It offers a digital output (PNP open-collector / 24Vdc / 100mA) and has a variable response time from 35µs (0.000035 s) in H-SP mode to 2ms (0.002 s) in LONG mode. The visual position indicator includes an orange LED for operation, a green LED for stability, and additional LEDs for various modes. A 4-digit red LED display provides clear readouts, and the power consumption is 0.96 W in normal mode and 0.84 W in Eco mode.

Panasonic

This item can ship within 24h!

PM-T44

$21.54

Verified stock: 138

Panasonic PM-T44 is a compact U-shaped (fork type) photoelectric sensor designed for a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is connected via a pre-wired 3m 4-core 0.09mm2 cabtyre PVC cable with bare flying leads. This sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared (IR) light with a wavelength of 855 nm for detection. The PM-T44 is equipped with two digital outputs (NPN open-collector / 24Vdc / 50mA), supporting both Light-ON and Dark-ON functions, and has a rapid response time of 80µs. An orange LED serves as a visual position indicator, and the sensor has a current consumption of 15mA. It is capable of detecting objects as small as 0.8x1.2mm.

Panasonic

This item can ship within 24h!

SL-CP1

$32.64

Verified stock: 808

Panasonic SL-CP1 is a 4-pin snap male connector designed for use in various automation applications. This connector comes in white and is specifically engineered to facilitate secure and straightforward connections within automated systems.

Panasonic

This item can ship within 24h!

GX-F8A

$22.85

Verified stock: 863

Panasonic GX-F8A is a rectangular inductive proximity sensor featuring a built-in amplifier. It is constructed with a PBT housing and comes pre-wired with a 1-meter 3-core 0.15mm2 cabtyre cable that is resistant to heat, cold, and oil, terminating in bare flying leads. This sensor operates within an ambient air temperature range of -25 to +70°C and offers a degree of protection rated at IP68G. It operates in a normally open (NO) mode at a standard frequency, with a current consumption of 15mA (0.015 A). The GX-F8A has a sensing distance of 0mm to 2.1mm and a sampling rate of 500 Hz. It includes 1 digital output (NPN open-collector / 24Vdc / 100mA) and features an orange LED as a visual position indicator. The sensor is designed to detect objects of the size of an iron sheet measuring 15x15x1mm.

Panasonic

This item can ship within 24h!

CN-70

$15.30

Verified stock: 316

Panasonic CN-70 is a connector designed for non-linear connections, facilitating the linkage between the main unit and the fiber sensor. It features a one-touch connector system for easy and quick connection to other devices.

Panasonic

This item can ship within 24h!

CX-411

$93.84

Verified stock: 184

Panasonic CX-411 is a compact photoelectric thru-beam sensor emitter and receiver pair designed for detecting objects with a minimum size of 12mm from up to 10 meters away. It is constructed with a PBT housing and an acrylic lens, ensuring durability within ambient air temperatures ranging from -25 to +55°C. This sensor is equipped with an orange LED for operation indication, a green LED for stability, and another green LED for power indication, facilitating easy monitoring. It operates with a red light of 680 nm wavelength and boasts a rapid response time of 1ms / 0.001 s. For connectivity, it features a pre-wired 2m 3-core (2-core on emitter side) 0.2mm2 cabtyre cable with bare end flying leads. The CX-411 offers a digital output (NPN open-collector / 24Vdc / 100mA) and supports both Light-ON and Dark-ON operating modes. It is designed to meet IP67 protection standards, ensuring protection against dust and water ingress.

Panasonic

This item can ship within 24h!

EX-FC1

$266.22

Verified stock: 323

Panasonic EX-FC1 is a connector designed with an ABS housing material, featuring a current consumption of 135mA / 0.135 A. It is equipped with a visual position indicator comprising eight green LEDs, one for each connected sensor, and an orange LED that illuminates when the output is ON. This part serves as a wire-saving unit and comes pre-wired with a 2m 3-core PVC cabtyre cable, terminated with bare flying leads. The total length of the cable is 2m.

Panasonic

This item can ship within 24h!

FT-KV26

$285.60

Verified stock: 1,198

Panasonic FT-KV26 is a fiber sensor designed as an emitter+receiver pair with a narrow beam. It features a head dimension of 1.5x2mm and a beam axis diameter of 1mm. The total length of the sensor is 2m. It operates within an ambient air temperature range of -40 to +80°C and offers a degree of protection rated at IP30. The minimum bending radius for this sensor is R2.

Panasonic

This item can ship within 24h!

FX-301P

$156.06

Verified stock: 607

Panasonic FX-301P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED for illumination. It is equipped with functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.5ms to 500ms, and a one-shot timer for enhanced control. The case cover is made from polycarbonate, while the housing utilizes heat-resistant ABS material. This part comes pre-equipped with a connector for easy installation. It includes protection features like outputs short-circuit protection to ensure durability and longevity. The FX-301P operates at a wavelength of 650 nm and can function within an ambient air temperature range of -10 to +55°C. It supports both Light-ON and Dark-ON operating modes. The current consumption is 30mA (0.03 A) under normal conditions and 24mA (0.024 A) in Eco mode, both at 24Vdc. It offers a digital output (PNP open-collector / 24Vdc / 100mA) and has a variable response time from 35µs (0.000035 s) in H-SP mode to 2ms (0.002 s) in LONG mode. The visual position indicator includes an orange LED for operation, a green LED for stability, and additional LEDs for various modes. A 4-digit red LED display provides clear readouts, and the power consumption is 0.96 W in normal mode and 0.84 W in Eco mode.

Panasonic

This item can ship within 24h!

PM-T44

$21.54

Verified stock: 138

Panasonic PM-T44 is a compact U-shaped (fork type) photoelectric sensor designed for a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is connected via a pre-wired 3m 4-core 0.09mm2 cabtyre PVC cable with bare flying leads. This sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared (IR) light with a wavelength of 855 nm for detection. The PM-T44 is equipped with two digital outputs (NPN open-collector / 24Vdc / 50mA), supporting both Light-ON and Dark-ON functions, and has a rapid response time of 80µs. An orange LED serves as a visual position indicator, and the sensor has a current consumption of 15mA. It is capable of detecting objects as small as 0.8x1.2mm.

Panasonic

This item can ship within 24h!

SL-CP1

$32.64

Verified stock: 808

Panasonic SL-CP1 is a 4-pin snap male connector designed for use in various automation applications. This connector comes in white and is specifically engineered to facilitate secure and straightforward connections within automated systems.

Panasonic

This item can ship within 24h!

GX-F8A

$22.85

Verified stock: 863

Panasonic GX-F8A is a rectangular inductive proximity sensor featuring a built-in amplifier. It is constructed with a PBT housing and comes pre-wired with a 1-meter 3-core 0.15mm2 cabtyre cable that is resistant to heat, cold, and oil, terminating in bare flying leads. This sensor operates within an ambient air temperature range of -25 to +70°C and offers a degree of protection rated at IP68G. It operates in a normally open (NO) mode at a standard frequency, with a current consumption of 15mA (0.015 A). The GX-F8A has a sensing distance of 0mm to 2.1mm and a sampling rate of 500 Hz. It includes 1 digital output (NPN open-collector / 24Vdc / 100mA) and features an orange LED as a visual position indicator. The sensor is designed to detect objects of the size of an iron sheet measuring 15x15x1mm.

Panasonic

FT-A11W Panasonic Through Beam Sensors

Part#:FT-A11W

Manufacturer:Panasonic

Product condition

FT-A11W Description

Panasonic Disclaimer:

Relevant products

FX-301P

PM-T44

SL-CP1

GX-F8A

CN-70

CX-411

EX-FC1

FT-KV26

FX-301P

PM-T44

SL-CP1

GX-F8A

CN-70

CX-411

EX-FC1

FT-KV26

FX-301P

PM-T44

SL-CP1

GX-F8A

We are a proud member of: