AWK-4131A-US-T Moxa Data & Networking Devices
Part#:AWK-4131A-US-T
Manufacturer:Moxa
Product Lifecycle:Active
Get a quick Quote!
802.11a/b/g/n access point, US band, IP68, -40 to 75°C operating temperature
Check out the AWK-4131A-US-T Moxa price in the box on the right side or send a quick quote.
Product Details
- Vibration IEC 60068-2-6
- Radio EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC
- Warranty Period 5 years
- Time 440,764 hrs
- Safety EN 60950-1, UL 60950-1
- EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV; IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m; IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV; IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV; IEC 61000-4-6 CS: 10 V; IEC 61000-4-8 PFMF
- EMI CISPR 32, FCC Part 15B Class A
- EMC EN 61000-6-2/-6-4
- Ambient Relative Humidity 5 to 95% (non-condensing)
- Reverse Polarity Protection Supported
- Operating Temperature -40 to 75°C (-40 to 167°F)
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- Power Consumption 7.68 W (max.)
- Power Connector M12 A-coded 5-pin male connector
- Management DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig
- Dimensions 224 x 147.7 x 66.5 mm (8.82 x 5.82 x 2.62 in)
- IP Rating IP68
- Input Voltage 12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet
- Security HTTPS/SSL, RADIUS, SSH
- Installation Wall mounting (standard), DIN-rail mounting (optional), Pole mounting (optional)
- Input Current 0.64 A @ 12 VDC, 0.16 A @ 48 VDC
- Weight 1,400 g (3.09 lb)
- Housing Metal
- Buttons Reset button
- Redundancy Protocols RSTP, STP
- LED Indicators PWR, FAULT, STATE, WLAN, LAN
- Digital Inputs +13 to +30 V for state 1; +3 to -30 V for state 0; Max. input current: 8 mA
- Console Port RS-232, 8-pin RJ45
- Filter ICMP, MAC address, IP protocol, Port-based
- Alarm Contact Channels Relay output with current carrying capacity of 1 A @ 24 VDC
- Time Management SNTP Client
- Routing Static Route, NAT, Port forwarding
- PoE Ports (10/100/1000BaseT(X), RJ45 connector) 1
- WLAN Operation Mode Access point, Client, Client-Router, Master, Slave, Sniffer
- WLAN Antenna Connector 2 N-type female
- Standards IEEE 802.3 for 10BaseT; IEEE 802.3u for 100BaseT(X); IEEE 802.3ab for 1000BaseT(X); IEEE 802.3at for PoE; IEEE 802.1D-2004 for Spanning Tree Protocol; IEEE 802.1w for Rapid Spanning Tree Protocol; IEEE 802.1Q for VLAN Tagging
- Receiver Sensitivity for 802.11b (measured at 2.437 GHz) Typ. -93 dBm @ 1 Mbps; Typ. -93 dBm @ 2 Mbps; Typ. -93 dBm @ 5.5 Mbps; Typ. -88 dBm @ 11 Mbps
- Antenna External, 3/6 dBi, Omni-directional
- Transmitter Power for 802.11g 23±1.5 dBm @ 6 to 24 Mbps; 21±1.5 dBm @ 36 Mbps; 19±1.5 dBm @ 48 Mbps; 18±1.5 dBm @ 54 Mbps
- Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz) Typ. -70 dBm @ MCS7 20 MHz; Typ. -69 dBm @ MCS15 20 MHz; Typ. -67 dBm @ MCS7 40 MHz; Typ. -67 dBm @ MCS15 40 MHz
- Receiver Sensitivity for 802.11g (measured at 2.437 GHz) Typ. -88 dBm @ 6 Mbps; Typ. -86 dBm @ 9 Mbps; Typ. -85 dBm @ 12 Mbps; Typ. -85 dBm @ 18 Mbps; Typ. -85 dBm @ 24 Mbps; Typ. -82 dBm @ 36 Mbps; Typ. -78 dBm @ 48 Mbps; Typ. -74 dBm @ 54 Mbps
- Transmitter Power for 802.11n (5 GHz) 23±1.5 dBm @ MCS0/8 20 MHz; 18±1.5 dBm @ MCS7/15 20 MHz; 23±1.5 dBm @ MCS0/8 40 MHz; 17±1.5 dBm @ MCS7/15 40 MHz
- Transmitter Power for 802.11b 26±1.5 dBm @ 1 Mbps; 26±1.5 dBm @ 2 Mbps; 26±1.5 dBm @ 5.5 Mbps; 25±1.5 dBm @ 11 Mbps
- Transmitter Power for 802.11n (2.4 GHz) 23±1.5 dBm @ MCS0/8 20 MHz; 18±1.5 dBm @ MCS7/15 20 MHz; 23±1.5 dBm @ MCS0/8 40 MHz; 17±1.5 dBm @ MCS7/15 40 MHz
- Receiver Sensitivity for 802.11a (measured at 5.680 GHz) Typ. -90 @ 6 Mbps; Typ. -88 @ 9 Mbps; Typ. -88 @ 12 Mbps; Typ. -85 @ 18 Mbps; Typ. -81 @ 24 Mbps; Typ. -78 @ 36 Mbps; Typ. -74 @ 48 Mbps; Typ. -72 @ 54 Mbps; Note: Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is
- Transmitter Power for 802.11a 23±1.5 dBm @ 6 to 24 Mbps; 21±1.5 dBm @ 36 Mbps; 20±1.5 dBm @ 48 Mbps; 18±1.5 dBm @ 54 Mbps
- Frequency Band for US (20 MHz operating channels) 2.412 to 2.462 GHz (11 channels); 5.180 to 5.240 GHz (4 channels); 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. How
- Transmission Rate 802.11b: 1 to 11 Mbps; 802.11a/g: 6 to 54 Mbps; 802.11n: 6.5 to 300 Mbps
- Modulation Type DSSS; OFDM; MIMO-OFDM
- Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) Typ. -69 dBm @ MCS7 20 MHz; Typ. -71 dBm @ MCS15 20 MHz; Typ. -63 dBm @ MCS7 40 MHz; Typ. -68 dBm @ MCS15 40 MHz; Note: Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels i
- Wireless Security WEP encryption (64-bit and 128-bit); WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES); WPA/WPA2-Personal
- WLAN Standards 802.11a/b/g/n; 802.11i Wireless Security
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents AWK-4131A-US-T Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Moxa
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Moxa Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Moxa Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Moxa, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨