8102882 Festo Quarter Turn Actuators
Part#:8102882
Manufacturer:Festo
Alt. Part#:DFPD-N-700-RP-90-RS35-F12-R3-C
Product Lifecycle:Active
Get a quick Quote!
About the product: semi-rotary drive DFPD-N-700-RP-90-RS35-F12-R3-C Size of actuator: 700, Flange hole pattern: F12, Swivel angle: 90 deg, End-position adjustment range at 0°: -5 - 5 deg, End-position adjustment range at 90°: -5 - 5 deg
About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8102882 Festo price in the box on the right side or send a quick quote.
8102882 Product Details
- Devices type according to VDMA 66413 Safety device
- Flange hole pattern F12
- End-position adjusting range at nominal swivel angle -5 deg ... 5 deg
- Mounting position Any
- Symbol 00991266
- Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
- Explosive ambient temperature -20°C <= Ta <= +80°C
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Torque at nominal operating pressure and 0° swivel angle 279.5 Nm
- Product weight 24723 g
- Note on materials RoHS-compliant
- Housing material Wrought aluminum alloy, anodized
- Operating pressure 2 bar ... 8 bar
- MTTFd 1126 years
- Swivel angle 90 deg
- Depth shaft connection 29 mm
- Mode of operation Single-acting
- Connection for valve positioner and position sensor conforms to standard VDI/VDE 3845 size AA 2
- Type of ignition protection for gas Ex h IIC T4 Gb X
- Certificate issuing authority DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
- Corrosion resistance class (CRC) 2 - Moderate corrosion stress
- Note about the torque The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
- Pneumatic connection 1/4 NPT
- Material of sub-base Wrought aluminum alloy, anodized
- Seals material NBR
- Cam material Steel
- Size of valve actuator 700
- PFH 1.01E-7
- End-position adjusting range at 0° -5 deg ... 5 deg
- Type code DFPD
- Design Gear rack/pinion
- Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
- ATEX category gas II 2G
- Ambient temperature -20 °C ... 80 °C
- Information on operating and pilot media Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
- Torque at nominal operating pressure and 90° swivel angle 161.9 Nm
- Shaft connection T27
- Material of piston Die-cast aluminum
- Nominal operating pressure 3.5 bar
- Maritime classification See certificate
- Standard connection for valve ISO 5211
- Safety integrity level (SIL) Up to SIL 2 low demand mode up to SIL 1 high demand mode
- ATEX category for dust II 2D
- Explosion prevention and protection Zone 1 (ATEX) Zone 22 (ATEX)
- Storage temperature -20 °C ... 60 °C
- Spring return torque at 0° swivel angle 142.6 Nm
- PFD 7.8E-4
- Material of spring Spring steel
- Shaft material High-alloy stainless steel
- Safety function The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
- Closing direction Clockwise closing
- Type of (ignition) protection for dust Ex h IIIC T105°C Db X
- CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX)
- Spring return torque with 90° swivel angle 260.1 Nm
- Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 24.5 l
- Cover material Die-cast aluminum, coated
- Material of bearing POM
- Material of screws High-alloy stainless steel
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8102882 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8102882
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
