Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

8102822 Festo Quarter Turn Actuators

Festo 8102822 semi-rotary drive DFPD-N-120-RP-90-RS45-F07-R3-C Size of actuator: 120, Flange hole pattern: F07, Swivel angle: 90 deg, End-position adjustment range at 0°: -5 - 5 deg, End-position adjustment range at 90°: -5 - 5 deg
Festo

Part#:8102822

Manufacturer:Festo

Alt. Part#:DFPD-N-120-RP-90-RS45-F07-R3-C

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: semi-rotary drive DFPD-N-120-RP-90-RS45-F07-R3-C Size of actuator: 120, Flange hole pattern: F07, Swivel angle: 90 deg, End-position adjustment range at 0°: -5 - 5 deg, End-position adjustment range at 90°: -5 - 5 deg

About the manufacturer: For more than 40 years in the United States and 80 years globally, Festo Corp. has been a positive force for manufacturers. The company's passion is automation & intelligent automation solutions that transform the way people work and the way companies com

Check out the 8102822 Festo price in the box on the right side or send a quick quote.

8102822 Product Details

  • Operating pressure
    2 bar ... 8 bar
  • MTTFd
    1126 years
  • End-position adjusting range at nominal swivel angle
    -5 deg ... 5 deg
  • Mode of operation
    Single-acting
  • Valve connection conforms to standard
    VDI/VDE 3845 (NAMUR)
  • ATEX category for dust
    II 2D
  • Type of ignition protection for gas
    Ex h IIC T4 Gb X
  • Explosion prevention and protection
    Zone 1 (ATEX) Zone 22 (ATEX)
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Note about the torque
    The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
  • Shaft connection
    T17
  • Material of spring
    Spring steel
  • Size of valve actuator
    120
  • Safety function
    The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
  • Flange hole pattern
    F07
  • Type code
    DFPD
  • Connection for valve positioner and position sensor conforms to standard
    VDI/VDE 3845 size AA 1
  • Explosive ambient temperature
    -20°C <= Ta <= +80°C
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Storage temperature
    -20 °C ... 60 °C
  • Spring return torque at 0° swivel angle
    31.6 Nm
  • Pneumatic connection
    1/4 NPT
  • Housing material
    Wrought aluminum alloy, anodized
  • Material of screws
    High-alloy stainless steel
  • PFH
    1.01E-7
  • End-position adjusting range at 0°
    -5 deg ... 5 deg
  • Depth shaft connection
    19 mm
  • Design
    Gear rack/pinion
  • Certified for safety function to ISO 13849 and IEC 61508 (SIL)
    Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
  • Ambient temperature
    -20 °C ... 80 °C
  • Information on operating and pilot media
    Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
  • Torque at nominal operating pressure and 0° swivel angle
    64.5 Nm
  • Spring return torque with 90° swivel angle
    62.5 Nm
  • Product weight
    5590 g
  • Material of sub-base
    Wrought aluminum alloy, anodized
  • Shaft material
    High-alloy stainless steel
  • Nominal operating pressure
    4.5 bar
  • Swivel angle
    90 deg
  • Standard connection for valve
    ISO 5211
  • Closing direction
    Clockwise closing
  • ATEX category gas
    II 2G
  • Certificate issuing authority
    DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
  • Torque at nominal operating pressure and 90° swivel angle
    33.6 Nm
  • Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
    4.3 l
  • Note on materials
    RoHS-compliant
  • Seals material
    NBR
  • Material of piston
    Die-cast aluminum
  • Devices type according to VDMA 66413
    Safety device
  • Maritime classification
    See certificate
  • Mounting position
    Any
  • Symbol
    00991266
  • Safety integrity level (SIL)
    Up to SIL 2 low demand mode up to SIL 1 high demand mode
  • Type of (ignition) protection for dust
    Ex h IIIC T105°C Db X
  • CE marking (see declaration of conformity)
    as per EU explosion protection directive (ATEX)
  • PFD
    7.8E-4
  • Cover material
    Die-cast aluminum, coated
  • Material of bearing
    POM
  • Cam material
    Cast stainless steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.


Related documents 8102822 Specs

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo