Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

8102816 Festo Quarter Turn Actuators

Festo 8102816 semi-rotary drive DFPD-80-RP-90-RS45-F07-R3-C-VDE2 Size of actuator: 80, Flange hole pattern: F07, Swivel angle: 90 deg, End-position adjustment range at 0°: -5 - 5 deg, End-position adjustment range at 90°: -5 - 5 deg
Festo

Part#:8102816

Manufacturer:Festo

Alt. Part#:DFPD-80-RP-90-RS45-F07-R3-C-VDE2

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: semi-rotary drive DFPD-80-RP-90-RS45-F07-R3-C-VDE2 Size of actuator: 80, Flange hole pattern: F07, Swivel angle: 90 deg, End-position adjustment range at 0°: -5 - 5 deg, End-position adjustment range at 90°: -5 - 5 deg

About the manufacturer: For more than 40 years in the United States and 80 years globally, Festo Corp. has been a positive force for manufacturers. The company's passion is automation & intelligent automation solutions that transform the way people work and the way companies com

Check out the 8102816 Festo price in the box on the right side or send a quick quote.

8102816 Product Details

  • End-position adjusting range at nominal swivel angle
    -5 deg ... 5 deg
  • Mode of operation
    Single-acting
  • Symbol
    00991266
  • ATEX category gas
    II 2G
  • Explosive ambient temperature
    -20°C <= Ta <= +80°C
  • Explosion prevention and protection
    Zone 1 (ATEX) Zone 22 (ATEX)
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Spring return torque at 0° swivel angle
    22.2 Nm
  • Devices type according to VDMA 66413
    Safety device
  • Maritime classification
    See certificate
  • End-position adjusting range at 0°
    -5 deg ... 5 deg
  • Design
    Gear rack/pinion
  • ATEX category for dust
    II 2D
  • PFD
    7.8E-4
  • Safety function
    The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
  • Swivel angle
    90 deg
  • Flange hole pattern
    F07
  • Mounting position
    Any
  • Note on materials
    RoHS-compliant
  • Nominal operating pressure
    4.5 bar
  • PFH
    1.01E-7
  • Depth shaft connection
    19 mm
  • Standard connection for valve
    ISO 5211
  • Valve connection conforms to standard
    VDI/VDE 3845 (NAMUR)
  • Type of ignition protection for gas
    Ex h IIC T4 Gb X
  • Information on operating and pilot media
    Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
  • Torque at nominal operating pressure and 0° swivel angle
    45.2 Nm
  • Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
    3.1 l
  • Cover material
    Die-cast aluminum, coated
  • Housing material
    Wrought aluminum alloy, anodized
  • Cam material
    Cast stainless steel
  • Size of valve actuator
    80
  • Operating pressure
    2 bar ... 8 bar
  • MTTFd
    1126 years
  • Type code
    DFPD
  • Closing direction
    Clockwise closing
  • Connection for valve positioner and position sensor conforms to standard
    VDI/VDE 3845 size AA 1
  • Type of (ignition) protection for dust
    Ex h IIIC T105°C Db X
  • CE marking (see declaration of conformity)
    as per EU explosion protection directive (ATEX)
  • Note about the torque
    The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
  • Product weight
    3856 g
  • Seals material
    NBR
  • Material of piston
    Die-cast aluminum
  • Shaft material
    High-alloy stainless steel
  • Safety integrity level (SIL)
    Up to SIL 2 low demand mode up to SIL 1 high demand mode
  • Certified for safety function to ISO 13849 and IEC 61508 (SIL)
    Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
  • Ambient temperature
    -20 °C ... 80 °C
  • Certificate issuing authority
    DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
  • Torque at nominal operating pressure and 90° swivel angle
    23.6 Nm
  • Shaft connection
    T17
  • Material of screws
    High-alloy stainless steel
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Storage temperature
    -20 °C ... 60 °C
  • Spring return torque with 90° swivel angle
    43.8 Nm
  • Pneumatic connection
    G1/8
  • Material of sub-base
    Wrought aluminum alloy, anodized
  • Material of bearing
    POM
  • Material of spring
    Spring steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.


Related documents 8102816 Specs

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo