8102810 Festo Quarter Turn Actuators

8102810 Product Details

• Size of valve actuator
  80
• Safety function
  The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
• Depth shaft connection
  19 mm
• Mode of operation
  Single-acting
• ATEX category gas
  II 2G
• Certificate issuing authority
  DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Note about the torque
  The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
• Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
  3.1 l
• Material of spring
  Spring steel
• Cam material
  Cast stainless steel
• MTTFd
  1126 years
• End-position adjusting range at 0°
  -5 deg ... 5 deg
• Mounting position
  Any
• Symbol
  00991266
• Certified for safety function to ISO 13849 and IEC 61508 (SIL)
  Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
• Explosive ambient temperature
  -20°C <= Ta <= +80°C
• CE marking (see declaration of conformity)
  as per EU explosion protection directive (ATEX)
• Spring return torque at 0° swivel angle
  22.2 Nm
• Product weight
  3863 g
Pneumatic connection
G1/8
Seals material
NBR
Devices type according to VDMA 66413
Safety device
PFH
1.01E-7
End-position adjusting range at nominal swivel angle
-5 deg ... 5 deg
Standard connection for valve
ISO 5211
Connection for valve positioner and position sensor conforms to standard
VDI/VDE 3845 size AA 1
Type of (ignition) protection for dust
Ex h IIIC T105°C Db X
Ambient temperature
-20 °C ... 80 °C
Information on operating and pilot media
Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
Torque at nominal operating pressure and 0° swivel angle
45.2 Nm
Spring return torque with 90° swivel angle
43.8 Nm
Material of sub-base
Wrought aluminum alloy, anodized
Housing material
Wrought aluminum alloy, anodized
Material of screws
High-alloy stainless steel
Nominal operating pressure
4.5 bar
Flange hole pattern
F07
Type code
DFPD
Design
Gear rack/pinion
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
ATEX category for dust
II 2D
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
PFD
7.8E-4
Cover material
Die-cast aluminum, coated
Material of bearing
POM
Shaft material
High-alloy stainless steel
Operating pressure
2 bar ... 8 bar
Swivel angle
90 deg
Maritime classification
See certificate
Closing direction
Clockwise closing
Safety integrity level (SIL)
Up to SIL 2 low demand mode up to SIL 1 high demand mode
Type of ignition protection for gas
Ex h IIC T4 Gb X
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Storage temperature
-20 °C ... 60 °C
Torque at nominal operating pressure and 90° swivel angle
23.6 Nm
Shaft connection
T17
Note on materials
RoHS-compliant
Material of piston
Die-cast aluminum

Product condition

Related documents 8102810 Specs