8102807 Festo Quarter Turn Actuators
Part#:8102807
Manufacturer:Festo
Alt. Part#:DFPD-N-40-RP-90-RS60-F05-R3-C
Product Lifecycle:Active
Get a quick Quote!
About the product: semi-rotary drive DFPD-N-40-RP-90-RS60-F05-R3-C Size of actuator: 40, Flange hole pattern: F05, Swivel angle: 90 deg, End-position adjustment range at 0°: -5 - 5 deg, End-position adjustment range at 90°: -5 - 5 deg
About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8102807 Festo price in the box on the right side or send a quick quote.
8102807 Product Details
- Operating pressure 2 bar ... 8 bar
- MTTFd 1126 years
- End-position adjusting range at 0° -5 deg ... 5 deg
- Standard connection for valve ISO 5211
- Closing direction Clockwise closing
- Ambient temperature -20 °C ... 80 °C
- Size of valve actuator 40
- Safety function The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
- Swivel angle 90 deg
- Type code DFPD
- Corrosion resistance class (CRC) 2 - Moderate corrosion stress
- Storage temperature -20 °C ... 60 °C
- Maritime classification See certificate
- Flange hole pattern F05
- Mounting position Any
- Connection for valve positioner and position sensor conforms to standard VDI/VDE 3845 size AA 1
- Spring return torque with 90° swivel angle 27.2 Nm
- Devices type according to VDMA 66413 Safety device
- End-position adjusting range at nominal swivel angle -5 deg ... 5 deg
- Mode of operation Single-acting
- Symbol 00991266
- Safety integrity level (SIL) Up to SIL 2 low demand mode up to SIL 1 high demand mode
- Type of ignition protection for gas Ex h IIC T4 Gb X
- Explosive ambient temperature -20°C <= Ta <= +80°C
- Explosion prevention and protection Zone 1 (ATEX) Zone 22 (ATEX)
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Spring return torque at 0° swivel angle 13.8 Nm
- Pneumatic connection 1/8 NPT
- Seals material NBR
- Nominal operating pressure 6 bar
- PFH 1.01E-7
- Depth shaft connection 16 mm
- Design Gear rack/pinion
- Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
- ATEX category gas II 2G
- Type of (ignition) protection for dust Ex h IIIC T105°C Db X
- Information on operating and pilot media Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
- Torque at nominal operating pressure and 90° swivel angle 14.5 Nm
- PFD 7.8E-4
- Note on materials RoHS-compliant
- Material of spring Spring steel
- Cam material Cast stainless steel
- Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
- ATEX category for dust II 2D
- Certificate issuing authority DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
- Torque at nominal operating pressure and 0° swivel angle 28 Nm
- Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 1.5 l
- Shaft connection T14
- Material of bearing POM
- CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX)
- Note about the torque The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
- Product weight 2185 g
- Housing material Wrought aluminum alloy, anodized
- Material of screws High-alloy stainless steel
- Cover material Die-cast aluminum, coated
- Material of sub-base Wrought aluminum alloy, anodized
- Material of piston Die-cast aluminum
- Shaft material High-alloy stainless steel
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8102807 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8102807
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
