8102166 Festo Electric Actuators

Product Details

• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic outputs 24 V DC
  2
• Product weight
  1442 g
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, number of ports
  1
• IO-Link®, data memory required
  500 byte
• Size
  60
• Piston rod thread
  M10x1.25
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Input switching logic
  PNP (positive switching)
• Switching logic at outputs
  PNP (positive switching)
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Power supply, number of pins/wires
  4
• Nominal current
  5.3 A
• IO-Link®, SIO mode support
  Yes
• IO-Link®, protocol version
  Device V 1.1
• Toothed belt material
  Polychloroprene with glass fiber
Feed constant
32 mm/U
Mounting position
Any
Rotor position sensor measuring principle
Magnetic
Insulation protection class
B
Certification
RCM compliance mark
Max. torque Mz
1 Nm
Basic weight with 0 mm stroke
1397 g
Housing material
Wrought aluminum alloy, anodized
Display
LED
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection type
Plug
Max. current consumption
5300 mA
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, port class
A
IO-Link®, Connection technology
Plug
Toothed belt elongation
0.375 %
Stroke
10 mm
Piston rod end
External thread
Position sensing
Motor encoder
Rotor position sensor
Absolute encoder, single-turn
Duty cycle
100%
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Max. torque Mx
0 Nm
Guide value for payload, horizontal
10 kg
Additional weight per 10 mm stroke
45 g
Type of mounting
With through-hole With accessories
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Parameterization interface
IO-Link® User interface
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
Number of digital logic inputs
2
Work range of logic input
24 V
Rotor position sensor resolution
16 bit
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Maintenance interval
Life-time lubrication
Drive pinion effective diameter
10.18 mm
Type code
EPCE
Homing
Fixed stop block positive Fixed stop block, negative
Max. speed
0.6 m/s
Permissible voltage fluctuations
+/- 15 %
Relative air humidity
0 - 90 %
Ambient temperature
0 °C ... 50 °C
Guide value for payload, vertical
5 kg
Reference value, running performance
100 km
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
KC characters
KC EMC
Logic input specification
Based on IEC 61131-2, type 1
Additional functions
User interface Integrated end-position sensing
Power supply, connection pattern
00995989
Characteristics of digital logic outputs
Configurable Not galvanically isolated
DC nominal voltage
24 V
Logic interface, number of poles/wires
8
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width IN
2 Byte
IO-Link®, communication mode
COM3 (230.4 kBd)
Protection class
III
Toothed belt pitch
2 mm
Stroke reserve
0 mm
Motor type
Stepper motor
Protection against torsion/guide
With plain-bearing guide
Repetition accuracy
±0.05 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. torque My
1 Nm
Moving mass at 0 mm stroke
197 g
Additional moving mass per 10 mm stroke
9.75 g
Cover material
Wrought aluminum alloy, anodized
Design
Electric actuator With integrated drive
Symbol
00997342
Max. acceleration
9 m/s²
Storage temperature
-20 °C ... 60 °C
Impact energy in the end positions
0.016 J
Max. feed force Fx
150 N
Piston rod material
High-alloy stainless steel

Related documents 8102166 Specs