8087819 Festo Pneumatic Components

8087819 Product Details

• Characteristics of logic input
  Configurable Not galvanically isolated
• Homing
  Fixed stop block positive Fixed stop block, negative
• Switching logic at outputs
  PNP (positive switching)
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection type
  Plug
• Number of digital logic outputs 24 V DC
  2
• Power supply, number of pins/wires
  4
• Rotor position sensor resolution
  16 bit
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• IO-Link®, Connection technology
  Plug
• Type code
  ERMS
• Gear ratio
  9:1
• Product weight
  1472 g
• Motor nominal current
  3 A
• Certification
  RCM compliance mark
• Peak torque
  2.7 Nm
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Position sensing
  Motor encoder
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
Logic interface, number of poles/wires
8
Max. current consumption
3000 mA
IO-Link®, port class
A
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
Angular acceleration
≤ 140 rad/s²
Type of mounting
With internal thread
Torsional backlash
0.2 deg
Max. radial force
450 N
Duty cycle
100%
Step angle tolerance
±5%
Rotor position sensor
Absolute encoder, single-turn
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Additional functions
User interface Integrated end-position sensing
Input switching logic
PNP (positive switching)
Ready status indication
LED
Power supply, type of connection
Plug
Number of digital logic inputs
2
Max. current of digital logic outputs
100 mA
IO-Link®, SIO mode support
Yes
IO-Link®, number of ports
1
IO-Link®, protocol version
Device V 1.1
Mounting position
Any
Repetition accuracy
±0.05 °
Step angle with full step
1.8 deg
Rotor position sensor measuring principle
Magnetic
Ambient temperature
0 °C ... 50 °C
KC characters
KC EMC
Display
LED
Parameterization interface
IO-Link® User interface
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Logic interface, connection pattern
00992264
Power supply, connection pattern
00995989
DC nominal voltage
24 V
Nominal current
3 A
Storage temperature
-20 °C ... 60 °C
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data width IN
2 Byte
IO-Link®, minimum cycle time
1 ms
Rotation angle
90°
Max. rotational speed
105 1/min
Motor type
Stepper motor
Degree of protection
IP40
Material of flange
Wrought aluminum alloy, anodized
Size
25
Permissible voltage fluctuations
+/- 15 %
Logic input specification
Based on IEC 61131-2, type 1
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Work range of logic input
24 V
Protection class
III
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, data memory required
500 byte
Design
Electromechanical rotary actuator with integrated gearbox
Max. axial force
350 N
Permissible mass moment of inertia
0.0065 kgm²
Insulation protection class
B
Symbol
00997295
Interface code, base
E8-55
Relative air humidity
0 - 85 %
Housing material
Wrought aluminum alloy, anodized

Product condition

Related documents 8087819 Specs