Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

8068931 Festo Quarter Turn Actuators

Festo 8068931 semi-rotary drive DFPD-N-700-RP-90-RS60-F1012-R3-EP single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, NPT
Festo

Part#:8068931

Manufacturer:Festo

Alt. Part#:DFPD-N-700-RP-90-RS60-F1012-R3-EP

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: semi-rotary drive DFPD-N-700-RP-90-RS60-F1012-R3-EP single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, NPT

About the manufacturer: For more than 40 years in the United States and 80 years globally, Festo Corp. has been a positive force for manufacturers. The company's passion is automation & intelligent automation solutions that transform the way people work and the way companies com

Check out the 8068931 Festo price in the box on the right side or send a quick quote.

8068931 Product Details

  • Maritime classification
    See certificate
  • End-position adjusting range at nominal swivel angle
    -5 deg ... 5 deg
  • Mode of operation
    Single-acting
  • Connection for valve positioner and position sensor conforms to standard
    VDI/VDE 3845 size AA 2
  • Type of ignition protection for gas
    Ex h IIC T4 Gb X
  • Explosion prevention and protection
    Zone 1 (ATEX) Zone 22 (ATEX)
  • Torque at nominal operating pressure and 90° swivel angle
    252.8 Nm
  • Spring return torque at 0° swivel angle
    258.1 Nm
  • Shaft connection
    T27
  • Seals material
    NBR
  • Cam material
    Steel
  • Nominal operating pressure
    6 bar
  • MTTFd
    1126 years
  • Swivel angle
    90 deg
  • Type code
    DFPD
  • Closing direction
    Clockwise closing
  • Certified for safety function to ISO 13849 and IEC 61508 (SIL)
    Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
  • Explosive ambient temperature
    -20°C <= Ta <= +80°C
  • Information on operating and pilot media
    Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
  • Torque at nominal operating pressure and 0° swivel angle
    465.5 Nm
  • Product weight
    26268 g
  • Note on materials
    RoHS-compliant
  • Housing material
    Wrought aluminum alloy, anodized
  • Shaft material
    High-alloy stainless steel
  • Size of valve actuator
    700
  • Safety function
    The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
  • Flange hole pattern
    F1012
  • Standard connection for valve
    ISO 5211
  • Symbol
    00991266
  • ATEX category gas
    II 2G
  • Ambient temperature
    -20 °C ... 80 °C
  • Storage temperature
    -20 °C ... 60 °C
  • Note about the torque
    The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
  • Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
    24.5 l
  • Material of spring
    Spring steel
  • Material of bearing
    POM
  • Devices type according to VDMA 66413
    Safety device
  • PFH
    1.01E-7
  • Depth shaft connection
    29 mm
  • Design
    Gear rack/pinion
  • Safety integrity level (SIL)
    Up to SIL 2 low demand mode up to SIL 1 high demand mode
  • Type of (ignition) protection for dust
    Ex h IIIC T105°C Db X
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • PFD
    7.8E-4
  • Pneumatic connection
    1/4 NPT
  • Material of screws
    High-alloy stainless steel
  • Operating pressure
    2 bar ... 8 bar
  • End-position adjusting range at 0°
    -5 deg ... 5 deg
  • Mounting position
    Any
  • Valve connection conforms to standard
    VDI/VDE 3845 (NAMUR)
  • ATEX category for dust
    II 2D
  • Certificate issuing authority
    DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
  • CE marking (see declaration of conformity)
    as per EU explosion protection directive (ATEX)
  • Spring return torque with 90° swivel angle
    470.7 Nm
  • Material of sub-base
    Wrought aluminum alloy, anodized
  • Cover material
    Die-cast aluminum, coated
  • Material of piston
    Die-cast aluminum

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.


Related documents 8068931 Specs

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo