8066454 Festo Quarter Turn Actuators
Part#:8066454
Manufacturer:Festo
Alt. Part#:DFPD-N-480-RP-90-RS30-F1012
Product Lifecycle:Active
Get a quick Quote!
About the product: semi-rotary drive DFPD-N-480-RP-90-RS30-F1012 single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, NPT contro
About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8066454 Festo price in the box on the right side or send a quick quote.
8066454 Product Details
- Nominal operating pressure 3 bar
- Maritime classification See certificate
- End-position adjusting range at nominal swivel angle -5 deg ... 5 deg
- Closing direction Clockwise closing
- Standard connection for valve ISO 5211
- Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
- Type of (ignition) protection for dust Ex h IIIC T105°C Db X
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Torque at nominal operating pressure and 0° swivel angle 173.5 Nm
- PFD 7.8E-4
- Material of sub-base Wrought aluminum alloy, anodized
- Housing material Wrought aluminum alloy, anodized
- Cam material Steel
- Operating pressure 2 bar ... 8 bar
- Safety function The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
- End-position adjusting range at 0° -5 deg ... 5 deg
- Mounting position Any
- Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
- Type of ignition protection for gas Ex h IIC T4 Gb X
- Explosive ambient temperature -20°C <= Ta <= +80°C
- Corrosion resistance class (CRC) 2 - Moderate corrosion stress
- Torque at nominal operating pressure and 90° swivel angle 90.5 Nm
- Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 17.2 l
- Cover material Die-cast aluminum, coated
- Material of piston Die-cast aluminum
- MTTFd 1126 years
- Swivel angle 90 deg
- Type code DFPD
- Symbol 00991266
- ATEX category gas II 2G
- Ambient temperature -20 °C ... 80 °C
- CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX)
- Note about the torque The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
- Pneumatic connection 1/4 NPT
- Note on materials RoHS-compliant
- Shaft material Steel, nickel-plated
- Size of valve actuator 480
- Devices type according to VDMA 66413 Safety device
- Depth shaft connection 29 mm
- Mode of operation Single-acting
- Safety integrity level (SIL) Up to SIL 2 low demand mode up to SIL 1 high demand mode
- Certificate issuing authority DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
- Storage temperature -20 °C ... 60 °C
- Spring return torque with 90° swivel angle 168.1 Nm
- Shaft connection T27
- Material of spring Spring steel
- Material of screws High-alloy stainless steel
- PFH 1.01E-7
- Flange hole pattern F1012
- Design Gear rack/pinion
- Connection for valve positioner and position sensor conforms to standard VDI/VDE 3845 size AA 2
- ATEX category for dust II 2D
- Explosion prevention and protection Zone 1 (ATEX) Zone 22 (ATEX)
- Information on operating and pilot media Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
- Spring return torque at 0° swivel angle 85 Nm
- Product weight 17261 g
- Seals material NBR
- Material of bearing POM
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8066454 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8066454
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
