8066418 Festo Quarter Turn Actuators
Part#:8066418
Manufacturer:Festo
Alt. Part#:DFPD-N-160-RP-90-RD-F0710-R3-EP
Product Lifecycle:Active
Get a quick Quote!
About the product: semi-rotary drive DFPD-N-160-RP-90-RD-F0710-R3-EP double-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, NPT co
About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8066418 Festo price in the box on the right side or send a quick quote.
8066418 Product Details
- Devices type according to VDMA 66413 Safety device
- Size of valve actuator 160
- Safety function The fundamental safety function is the execution of a complete working stroke (opening and closing of the process valve) within a defined time.
- Flange hole pattern F0710
- Operating pressure 2 bar ... 8 bar
- MTTFd 1126 years
- Swivel angle 90 deg
- Type code DFPD
- Symbol 00991265
- Type of ignition protection for gas Ex h IIC T4 Gb X
- Certificate issuing authority DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
- Storage temperature -20 °C ... 60 °C
- PFD 0.00142
- Material of sub-base Wrought aluminum alloy, anodized
- Material of piston Die-cast aluminum
- Material of screws High-alloy stainless steel
- End-position adjusting range at 0° -5 deg ... 5 deg
- Standard connection for valve ISO 5211
- Design Gear rack/pinion
- Connection for valve positioner and position sensor conforms to standard VDI/VDE 3845 size AA 1
- Ambient temperature -20 °C ... 80 °C
- Information on operating and pilot media Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
- CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX)
- Pneumatic connection 1/4 NPT
- Note on materials RoHS-compliant
- Cam material Cast stainless steel
- Nominal operating pressure 5.5 bar
- PFH 1.01E-7
- End-position adjusting range at nominal swivel angle -5 deg ... 5 deg
- Mode of operation Double-acting
- Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
- Safety integrity level (SIL) Up to SIL 2 low demand mode up to SIL 1 high demand mode
- Explosive ambient temperature -20°C <= Ta <= +80°C
- Corrosion resistance class (CRC) 2 - Moderate corrosion stress
- Product weight 6082 g
- Seals material NBR
- Shaft material High-alloy stainless steel
- Maritime classification See certificate
- Depth shaft connection 24 mm
- Closing direction Clockwise closing
- ATEX category gas II 2G
- Type of (ignition) protection for dust Ex h IIIC T105°C Db X
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Torque at nominal operating pressure and 90° swivel angle 161 Nm
- Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 14 l
- Shaft connection T22
- Housing material Wrought aluminum alloy, anodized
- Mounting position Any
- Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
- ATEX category for dust II 2D
- Explosion prevention and protection Zone 1 (ATEX) Zone 22 (ATEX)
- Torque at nominal operating pressure and 0° swivel angle 161 Nm
- Note about the torque The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
- Cover material Die-cast aluminum, coated
- Material of bearing POM
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8066418 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8066418
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
