8063637 Festo Manifold Dispensers

8063637 Product Details

• Storage temperature
  -20 °C ... 70 °C
• Note on dosing volume
  Depending on the configuration, environment and application
• Nominal altitude of use above sea level
  <= 2000 m NHN
• Min. dosing volume
  1 µl
• Nominal width
  0.8 mm
• Type of control
  Direct
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Materials in contact with the media
  ETFE High-alloy stainless steel
• Material of dosing needle
  High-alloy stainless steel
• Product weight
  220 g
• Operating pressure
  0 bar ... 0.5 bar
• Note on switching frequency
  Dependent on the ambient temperature and installation state
• Application note
  See application note (available on the support portal at festo.com)
• Note on switching time off
  Depending on the configuration, environment and application
• Length of dosing needle
  30 mm
• Sealing principle
  Soft
• Nominal operating voltage DC
  24 V
• Degree of protection
  IP30
• Actuation type
  Electrical
• Type of mounting
  Optionally: With internal thread and centering sleeve
Note on fluid connector
Fitting enclosed for pneumatic tubing with 3 mm outside diameter
Electrical connection
9-pin Sub-D
Nominal width of dosing needle
0.32 mm
Internal volume
113 µl valve with fluid connections
Information on medium
Observe resistance of materials that come into contact with media
Note on switching time on
Depending on the configuration, environment and application
Medium
Liquid media
On switching time
7 ms
Max. switching frequency
4 Hz
Corrosion resistance class (CRC)
0 - No corrosion stress
Temperature of medium
5 °C ... 50 °C
Fluid connector
8x UNF1/4-28
Duty cycle
50 % (max. switch-on time 1 s)
Width dimension
9 mm
Note on dosing precision
Depending on the configuration, environment and application
Typical dosing precision
<1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
Contamination level
2
Switching time off
2 ms
Reset method
Mechanical spring
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Ambient temperature
5 °C ... 40 °C
Valve function
2/2, closed, monostable
Mounting position
Any
Material number for dosing needle
1.4301
Note on power consumption
Specification per pneumatic valve
Water flow rate at max. operating pressure
370 µl/s
Relative air humidity
0 - 95 % Non-condensing
Note on degree of protection
In mounted state
Electrical power consumption
1.8 W
Type code
VTOE
Permissible voltage fluctuations
+/- 10 %
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

Product condition

Related documents 8063637 Specs