8063374 Festo Manifold Dispensers
![Festo 8063374 dispense head VTOE-D9-T3-M22C-08-F-P-P-S Valve function: 2/2 closed, monostable, Operating pressure MPa: 0 - 0,05 MPa, Operating pressure: 0 - 0,5 bar, Operating pressure [psi]: 0 - 7,25 psi, Internal volume: 113 µl valve with fluid connections](/_next/image?url=https%3A%2F%2Fappstoragepublicprod.s3-us-west-1.amazonaws.com%2FPartImage%2F7cf82975-169f-40ea-a9f9-fd785e263e96.jpg&w=3840&q=75 "Festo 8063374 dispense head VTOE-D9-T3-M22C-08-F-P-P-S Valve function: 2/2 closed, monostable, Operating pressure MPa: 0 - 0,05 MPa, Operating pressure: 0 - 0,5 bar, Operating pressure [psi]: 0 - 7,25 psi, Internal volume: 113 µl valve with fluid connections")
Part#:8063374
Manufacturer:Festo
Alt. Part#:VTOE-D9-T3-M22C-08-F-P-P-S
Product Lifecycle:Active
Get a quick Quote!
About the product: dispense head VTOE-D9-T3-M22C-08-F-P-P-S Valve function: 2/2 closed, monostable, Operating pressure MPa: 0 - 0,05 MPa, Operating pressure: 0 - 0,5 bar, Operating pressure [psi]: 0 - 7,25 psi, Internal volume: 113 µl valve with fluid connections
About the manufacturer: Festo is one of the manufacturers that offers Manifold Dispensers that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8063374 Festo price in the box on the right side or send a quick quote.
8063374 Product Details
- Medium Liquid media
- Material number for dosing needle 1.4301
- Width dimension 9 mm
- Internal volume 113 µl valve with fluid connections
- Nominal altitude of use above sea level <= 2000 m NHN
- Note on switching time on Depending on the configuration, environment and application
- Reset method Mechanical spring
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Fluid connector UNF1/4-28
- Note on fluid connector Fitting enclosed for pneumatic tubing with 3 mm outside diameter
- Material of dosing needle High-alloy stainless steel
- Storage temperature -20 °C ... 70 °C
- Water flow rate at max. operating pressure 2000 µl/s
- Note on switching frequency Dependent on the ambient temperature and installation state
- Typical dosing precision <1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
- Note on switching time off Depending on the configuration, environment and application
- Min. dosing volume 5 µl
- Sealing principle Soft
- Nominal operating voltage DC 24 V
- Degree of protection IP30
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Materials in contact with the media ETFE High-alloy stainless steel
- Electrical connection 2-wire Open end
- Nominal width of dosing needle 1 mm
- Relative air humidity 0 - 95 % Non-condensing
- Application note See application note (available on the support portal at festo.com)
- Note on degree of protection In mounted state
- Switching time off 2 ms
- Nominal width 0.8 mm
- Type of control Direct
- Temperature of medium 5 °C ... 50 °C
- Actuation type Electrical
- Type of mounting With internal thread and centering sleeve
- Duty cycle 100 % with individual mounting 50 % in case of block mounting (max. switch-on time 1 s)
- Wire ends Stripped
- Product weight 18 g
- Operating pressure 0 bar ... 0.5 bar
- Note on dosing precision Depending on the configuration, environment and application
- Information on medium Observe resistance of materials that come into contact with media
- Contamination level 2
- On switching time 7 ms
- Type code VTOE
- Max. switching frequency 4 Hz
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Ambient temperature 5 °C ... 40 °C
- Valve function 2/2, closed, monostable
- Mounting position Any
- Nominal conductor cross section AWG28
- Cable length 0.15 m
- Note on dosing volume Depending on the configuration, environment and application
- Length of dosing needle 30 mm
- Electrical power consumption 1.8 W
- Permissible voltage fluctuations +/- 10 %
- Corrosion resistance class (CRC) 0 - No corrosion stress
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8063374 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8063374
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
