8058478 Festo Flow Sensors

8058478 Product Details

• Pneumatic connection, outlet direction
  Straight
• Electrical connection 1, connection technology
  M8x1 A-coded as per EN 61076-2-104
• Protection against tampering
  IO-Link® PIN code
• Electrical connection for input 1, connection pattern
  00991171
• Electrical connection 1, number of pins/wires
  4
• Note on materials
  RoHS-compliant
• Flow measuring range end value
  200 l/min
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Flow measuring range start value
  4 l/min
• Operating pressure
  -0.9 bar ... 10 bar
• Accuracy of flow rate
  ± (2% o.m.v. + 1% FS)
• Pressure influence of margin in ±%FS/bar
  1 %FS/b.
• Short-circuit protection
  yes
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• IO-Link®, process data content IN
  1 bit BDC (volume monitoring) 2 bit BDC (flow monitoring)
• IO-Link®, data memory required
  < 500 byte
• Type of mounting
  With accessories
• Housing material
  PA-reinforced
• Pressure drop
  56 mbar
• Electrical connection 1, connection type
  Plug
Idle current
≤ 25 mA
Symbol
00995794
Flow direction
Unidirectional
Operating medium
Argon Nitrogen
Temperature co-efficient margin in ± %FS/K
typ. 0.15% FS/K
Max. output current
100 mA
Max. load resistance of current output
500 Ohm
Overload protection
Available
IO-Link®, process data width IN
3 Byte
DC operating voltage range
22 V ... 26 V
Reverse polarity protection
for all electrical connections
Display type
Illuminated LCD, multi-color
Degree of protection
IP40
Type code
SFAH
KC characters
KC EMC
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Measuring principle
Thermal
Nominal temperature
23 °C
Switching output
2 x PNP or 2 x NPN switchable
Flow characteristic curve, start value
0 l/min
Protocol
IO-Link®
IO-Link®, SIO mode support
Yes
IO-Link®, service data contents IN
32 bit volume/mass measurement
Pneumatic connection
For pneumatic tubing outside diameter 8 mm
Product weight
60 g
Materials in contact with the media
Wrought aluminum alloy, anodized High-alloy stainless steel
Setting options
IO-Link® Via display and pushbuttons
Certificate issuing authority
UL E322346
Measured variable
Mass flow rate Volumetric flow rate
Method of measurement
Heat transfer
Ambient temperature
0 °C ... 50 °C
Repetition accuracy margin in ± %FS
0.8 %FS
Switching element function
N/C contact/N/O contact switchable
Flow characteristic curve, end value
200 l/min
Min. load resistance of voltage output
20 kOhm
IO-Link®, profile
Smart sensor profile
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, minimum cycle time
4 ms
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Temperature of medium
0 °C ... 50 °C
Zero point repetition accuracy in ± %FS
0.2 %FS
Switching function
Window comparator Auto difference monitoring
Analog output
0 - 10 V 1 - 5 V
IO-Link®, protocol version
Device V 1.1
IO-Link®, port class
A
Mounting position
Any
Displayable unit(s)
g scft/min
Protection class
III

Product condition

Related documents 8058478 Specs