8041716 Festo Proportional Valves

8041716 Product Details

• Type of control
  Direct
• Symbol
  00995603
• Flow direction
  Non-reversible
• Absolute accuracy in ± %FS at room temperature
  3 %FS
• Ambient temperature
  0 °C ... 50 °C
• CE marking (see declaration of conformity)
  As per EU EMC directive as per EU explosion protection directive (ATEX)
• Corrosion resistance class (CRC)
  1 - Low corrosion stress
• ATEX category for dust
  II 3D
• Nominal operating voltage DC
  24 V
• Current consumption with load-free outputs
  150 mA
• Analog input signal range
  0 - 10 V
• Pneumatic connection 1
  G3/8
• Nominal width
  6 mm
• Display type
  LED
• Repetition accuracy in ± %FS
  0.5 %FS
• Operating medium
  Compressed air as per ISO 8573-1:2010 [6:4:4]
• Note on degree of protection
  In mounted state
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Residual ripple
  5 %
• Switching input
  PNP
Max. electrical power consumption
36 W
Diagnostic function
Indication via LED
Pneumatic connection 3
G3/8
Housing material
Wrought aluminum alloy, anodized
Design
Piston gate valve with integrated pressure sensors
Reset method
Magnetic spring
Short-circuit protection
yes
Flow rate control range
30 l/min ... 1500 l/min
Temperature of medium
15 °C ... 35 °C
Note on materials
RoHS-compliant
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
ATEX category gas
II 3G
Max. current consumption
1.2 A
Current rating per output
100 mA
Reverse polarity protection
for operating voltage
Electrical connection
8-pin Plug
Product weight
856 g
Explosion prevention and protection
Zone 2 (ATEX) Zone 22 (ATEX)
Type code
VPCF
Sealing principle
Hard
Mounting position
Any
Operating pressure
1 bar ... 10 bar
Hysteresis in ± %FS
0.8 %FS
Information on operating and pilot media
Operation with oil lubrication not possible Maximum particle size 5 µm
Certification
RCM compliance mark
Type of (ignition) protection for dust
Ex tc IIIC T60°C X Dc
DC operating voltage range
20.4 V ... 30 V
Duty cycle
100%
Type of mounting
Direct mounting via through-hole Direct fastening via thread
Valve function
3-way proportional flow control valve
Actuation type
Electrical
Flow rate range
0 l/min ... 1500 l/min
Note on the flow rate control range
Regulation takes place at 30 l/min; below this setpoint value, the flow control valve switches to the exhausting position. The accuracy specifications provided are based on a flow rate control range of 75-1500 l/min.
Degree of protection
IP65
Type of ignition protection for gas
Ex nA IIC T5 X Gc
Explosive ambient temperature
0°C <= Ta <= +50°C
Switching output
PNP
Analog output signal range
0 - 10 V
Pneumatic connection 2
G3/8
Seals material
FPM HNBR

Product condition

Related documents 8041716 Specs